Hi Kwackman Thanks for your help, when I select the link you gave me, I get the same reply as I got when I looked for this recently, which is This content isn't available at the moment When this happens, it's usually because the owner only shared it with a small group of people or changed who can se...

Hi all Can anyone tell me if the Z250 UK owners Facebook group has come to an end or is it still going. I am a member but recently I have not been able to find the group. I'm trying to find replacement carb membranes for my 1981 Z250 A3 Twin, I think the OEM is = 16126-1042. Does anyone know if thes...

Hi David Thanks for the advice, I will follow upon this. I currently have a 2-1 on the bike but I would prefer something closer to the original. As you will know the balance pipe between the twin silencers of the exhaust is a weak point for serious rust, I have some options with one of these but I'm...

Thanks Garry, will do, Thanks.

Looking for Z250A twin exhaust, anyone able to help?
Thanks.

Assuming its the same as the J; the flat plate with the captive bearings in it has a cut away on one side. The inner casing cast boss has a 'tab' where the bearing plate sits. Its barely noticeable. Make sure the plate is not sitting on top of the tab and the flat cut away side is on the tab side. ...

Likely just needs the cable tension adjusted; Carefully install the sprocket cover, making sure the push rod is engaged and then tighten up the cover. Adjust the clutch play and cable tension; using a flat bladed screwdriver, turn the slotted screw clockwise(to the right) until it becomes hard to t...

Thanks again for the advice already given- I contacted the outlets you suggested, can source 4 or so of the parts for the clutch mechanism that is involved- no surprise that the most important part is "obsolete" - complete clutch release -the search continues. To the point now, can i expla...

z1bman wrote:if you mean this part cradley have it in stock


http://www.partzilla.com/parts/detail/k ... -1091.html

The part shown is part of the very item I need, thanks for your help, partzilla do the same set up on the 1983 Z1000 J3. Hopefully I can help someone out in due course.

twozeds wrote:Try Z-Power 01942 - 262864

Many thanks, will follow this up, hopefully I can offer some help myself on this forum when necessary.

Any idea where I can get this set up for a 1980 Z250 A3. The Version for the Z1 from Japan is too costly. Thanks