Nothing! Not even back firing now Rechecked the cables from the Dyna to the coils and they are correct, I even swapped them over to see if that made a difference but it didn't. All plugs sparking but nothing. As per the Dyna instructions I lined the advance mark on the timing plate with the mark on ...

The new inlet rubbers should be here tomorrow. Watch this space for an update!

Hi all Thanks for all the replies. I have double checked everything, all the timing is correct and the coil leads are going to the correct cylinders. I spoke with Phil at Z Power and he said that the fuel leaking from the inlet rubbers was probably the cause of no fuel getting into the cylinders. I'...

Hi Chris

Thanks for the reply. I am using an open container hanging above the bike to supply fuel, yes there is fuel in the float bowls.

Dave

Hi I have just rebuilt my Z1B and I cannot get it to start, I think it is a fuel starvation problem! The bike has Dyna S ignition and I have followed the instructions on how to set that up so I am pretty confident the static timing is correct, the test light comes on when the rotor is fully clockwis...

I am trying to time the Dyna S on my Z1, I found this post but the link does not work. Can someone post the instructions again?

Hi

I have two cracks in my top crank case that need repairing, see images. Can anybody recommend anyone in Ireland that can do the repairs

Thanks
Dave