Cheers guys got everything sorted now couldn't find a 310mm stainless bolt for the front but will have to get a 400mm bolt and cut and thread to size.

Does any one do these in stainless not the engine casing/covers set but the bolts that hold the engine to the frame Z1000st. If not is there any problem with using fully threaded bar or would it be better to get un- threaded bar and cut my own threads these would be for the longer bolts I believe th...

Fitted the seat base with all the panels and tank removed to get a clearer view to find only one rubber is actually doing its job think I'll buy the set and will have to cut them to fit and drill new holes as this is an aftermarket seat the rubbers are different 1743866554981-49828505.jpg Just found...

i have had new seat cover made but missing some rubber buffers from the base at the tail piece end the hole top left can see the mark where the rubber was like the one bottom left of pic what about the other two holes same buffers ? this is an aftermarket (fiberglass base) seat z1000st If some can s...

wanted ads page 5 "z1000st,uk spec speedo and cam cover" hope this helps.

all sorted thanks roger.
thanks mike but yours looks different to what i got don't think it will fit.

Bit of a long shot but does anyone got a rev counter beyond repair/smashed only need the drive the bit the cable screws into came off a z1000st but would assume fitted in most zeds.

cheers warren have got a new open cable fits perfect the problem is the close cable people are using this part number but the inner cable is far too long have ordered a cable nipple so i can shorten it but will keep trying and sending them back till i get the right one.

Does anyone know where I can get these that are actually are the correct length or a part number that fits before I go mad

New intake rubbers fitted with stainless Allen's that's one job done...well half a job IMG_20240906_175559~2.jpg While carbs were off checked throttle cables very distorted and frayed so new open close throttle cables fitted. Only thing is the more new parts fitted the worst the rest looks but as I ...

Thanks guys.

Is there anyone doing exchange for the 29mm shims or is it something I just have to buy.

Sorry haven't kept this up to date things that have happened New tyres fitted Calipers striped cleaned out new stainless pistons,seals and bushes fitted Electrics now all work many corroded connections cleaned Found a set of original rear master seals which lasted 5 minutes before I had a massive le...

Pull it apart cleaned out and rebuilt this is not an original master just one of those £30 eBay jobs to be honest I think it's shot fluid went a light shade of black and had constant bubbles when it was just the master bleeding think I've worn it out just trying to bleed it. IMG_20240901_183307.jpg

Blanked of the master and bleed it on its own and still couldn't get any pressure would explain why nothing worked so much for my new master cylinder