Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Search found 1964 matches

Author: PAULJAC47
Tue Jun 19, 2018 5:41 pm
Forum: Bike Help
Topic: A4 air box
Replies: 9
Views: 187

Re: A4 air box

Still a solution,once panels and seat are on would not be visible,a4 air boxes are now hens teeth...
Author: PAULJAC47
Tue Jun 19, 2018 8:30 am
Forum: Bike Help
Topic: A4 air box
Replies: 9
Views: 187

Re: A4 air box

If you already have a thou airbox and silencer,why not get hold of a thou battery box? its only the height of the battery box that stops the airbox from a thou to be easily fitted,or if you dont wont to adjust your a4 batt box a bit of fabrication would be pretty easy,bet Dks have a thou box!
Author: PAULJAC47
Sun Jun 17, 2018 9:41 am
Forum: Wanted Adz
Topic: Z900 A4 air box
Replies: 5
Views: 224

Re: Z900 A4 air box

Z Thou box will fit ,just need to tweak the battery box a bit.
Author: PAULJAC47
Sat Jun 16, 2018 6:28 pm
Forum: Bike Help
Topic: Cam Chain tension
Replies: 4
Views: 188

Re: Cam Chain tension

As said defo not normal,wouldnt want to be running that on a hill climb till you sort that out.
Author: PAULJAC47
Sat Jun 16, 2018 9:11 am
Forum: Bike Help
Topic: z thou rear disc brake pads.
Replies: 12
Views: 193

Re: z thou rear disc brake pads.

Excellent info, that explains the conundrum,pistons were listed for A1 and A2 as are the different pads,what thickness are the sintered pads? looks like getting a set of those is the answer..Thanks for that...Paul j
Author: PAULJAC47
Fri Jun 15, 2018 4:01 pm
Forum: Bike Help
Topic: Centre stand spring.
Replies: 2
Views: 86

Re: Centre stand spring.

Put spring on b4 you bolt on stand,leave bike on side stand,there is not much tension when stand is up,use i rod or screwdriver to lever stand on position then insert bolts,or use spring puller,easy to make just a hook with a loop on the end.
Author: PAULJAC47
Fri Jun 15, 2018 2:57 pm
Forum: Bike Help
Topic: z thou rear disc brake pads.
Replies: 12
Views: 193

Re: z thou rear disc brake pads.

A1
Author: PAULJAC47
Fri Jun 15, 2018 8:57 am
Forum: Bike Help
Topic: z thou rear disc brake pads.
Replies: 12
Views: 193

Re: z thou rear disc brake pads.

They have a heat sink disc..
Author: PAULJAC47
Thu Jun 14, 2018 9:17 pm
Forum: Bike Help
Topic: z thou rear disc brake pads.
Replies: 12
Views: 193

Re: z thou rear disc brake pads.

Correct free play in the rod,mc at correct level,have not tried loosening spindle nut,have measured gap between pistons going back fully level with dust seal lip, to see if enough gap with 9mm pads, plus shims, plus disc thickness 7.5mm,seems 2mm too much,would need to lose shims or pads would need ...
Author: PAULJAC47
Thu Jun 14, 2018 5:50 pm
Forum: Bike Help
Topic: z thou rear disc brake pads.
Replies: 12
Views: 193

Re: z thou rear disc brake pads.

Thats what i have?
Author: PAULJAC47
Thu Jun 14, 2018 3:47 pm
Forum: Bike Help
Topic: fork damper tool z900a4 z1000a
Replies: 9
Views: 126

Re: fork damper tool z900a4 z1000a

How about a torx on the end of and extension?
Author: PAULJAC47
Thu Jun 14, 2018 3:45 pm
Forum: Bike Help
Topic: z thou rear disc brake pads.
Replies: 12
Views: 193

z thou rear disc brake pads.

Guyz,Changing out rear pads on z thou disc brake,new pads 9mm thick overall would not go in without bad binding on rotor,pistons are defo all the way back in level with dust seal lip,caliper is dead central to rotor which is 7.5mm thick and not warped,old pads are 7mm thick overall and 1mm from wear...
Author: PAULJAC47
Wed Jun 13, 2018 8:56 pm
Forum: Wanted Adz
Topic: Z1r wanted
Replies: 9
Views: 318

Re: Z1r wanted

Say Hello and do an intro ,will help your quest in the long run...
Author: PAULJAC47
Mon Jun 11, 2018 7:41 am
Forum: Bike Help
Topic: Carburettor refurbishment
Replies: 11
Views: 309

Re: Carburettor refurbishment

As Chris said,if they work ok ok leave well alone,i have found a lot of the refurb kits leave a lot to be desired...

Go to advanced search