Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Search found 1166 matches
Re: z1000 a2
so easy to tell just by looking at rear footrest hangers thou A's are unique to the model.
- Sat Mar 23, 2024 12:43 pm
- Forum: For Sale
- Topic: Z1000 A2/D and ltd fork legs, z1000Carbs. NOW SOLD
- Replies: 0
- Views: 166
Z1000 A2/D and ltd fork legs, z1000Carbs. NOW SOLD
Z1000 A2/D and ltd fork legs, z1000 slightly modified improved 26mm pumper Carbs. Z1000, pumpers, fork legs clutch pack, sprocket cover dampening, used speedo and throttle cables,rear wheel adjuster bolts and nut, 2 brake reservoir covers round type, pair of 30 tooth cam sprockets and some front bra...
- Thu Nov 30, 2023 8:22 pm
- Forum: The Bottom Shed
- Topic: VFR400R NC24
- Replies: 4
- Views: 5802
Re: VFR400R NC24
I had a rothmans nc24, beautiful little bike deristricted a proper little rev monster and handling very good.
- Mon Sep 11, 2023 9:13 pm
- Forum: Bike Help
- Topic: Anyone running boyer ignition?
- Replies: 14
- Views: 28880
Re: Anyone running boyer ignition?
Warren contact Boyer, they are pretty good to deal with and are just outside Maidstone, I've used a lot of Boyers over the years and never had problems, check the pick up for resistance to eliminate it, chances are at some stage the box has been wired up wrong and could be toast.
- Mon Jul 17, 2023 6:01 am
- Forum: Bike Help
- Topic: Cam Chain Rivet Tool
- Replies: 4
- Views: 2015
Re: Cam Chain Rivet Tool
ball pein hammer
- Mon Jul 17, 2023 5:58 am
- Forum: Bike Help
- Topic: Cam Chain Link Options
- Replies: 2
- Views: 1940
Re: Cam Chain Link Options
As Al says go with the soft link, i have done many like tis and never had any problems.
- Thu Jun 15, 2023 3:53 pm
- Forum: Bike Help
- Topic: Voltage at Battery z900A4
- Replies: 4
- Views: 1637
Re: Voltage at Battery z900A4
Short answer is no, probably regulator rectifier issue.
Re: Carbs
If a2 they will have a vacuum stubb on number 3 carb.
- Sun May 14, 2023 4:57 pm
- Forum: Bike Help
- Topic: Cannot use choke even when cold
- Replies: 2
- Views: 2243
Re: Cannot use choke even when cold
Took the carbs back off after trying with air scews 2 and 1/2 turns out, did not realise I had weakened it off that much, still sooting up, for some reason I had put 17.5 pilots in, probably because I had the same size in the 26 pumpers I had on, so back to 15 pilots, air screw 1 and 3/8th's out fir...
- Fri May 12, 2023 6:12 am
- Forum: Bike Help
- Topic: Cannot use choke even when cold
- Replies: 2
- Views: 2243
Cannot use choke even when cold
I have refurbed 28mm pumpers, plungers done bt Z1015, jetting is stock , will fire up on choke but have to turn off immediately, if I keep it lifted it stops the motor, once warmed idles and runs perfectly with light tan plugs, seems it does not like choke even if I only have it partially on, stumpe...
- Sat Apr 22, 2023 4:43 pm
- Forum: Bike Help
- Topic: Mixture screws
- Replies: 3
- Views: 2700
Re: Mixture screws
I guess you are going to modify a set with the orange.
- Fri Apr 21, 2023 9:01 pm
- Forum: Bike Help
- Topic: Mixture screws
- Replies: 3
- Views: 2700
Re: Mixture screws
I assume you have the carbs with the mixture screw in lower picture, if so the screw with the o ring will not fit, you either set up carbs and plug holes with anti tamper plugs or modify a set of the top picture air screws and sleeve the hole, I have recently done this myself.
- Mon Mar 27, 2023 6:19 am
- Forum: Bike Help
- Topic: z1b carb t pieces
- Replies: 9
- Views: 3704
Re: z1b carb t pieces
As they are apart if you look in the holes where the middle tee is there would be a 4mm hole in the casting, if not its a pointless tee.
- Sat Mar 25, 2023 10:26 pm
- Forum: Bike Help
- Topic: z1b carb t pieces
- Replies: 9
- Views: 3704
Re: z1b carb t pieces
By your explanation, you have 3 fuel inlets at the bottom.
- Fri Feb 24, 2023 8:50 pm
- Forum: Bike Help
- Topic: Kawasaki Z1/Z900 top cam roller DIY repair guide
- Replies: 20
- Views: 6716
Re: Kawasaki Z1/Z900 top cam roller DIY repair guide
I would be afraid to put that back in my bike, praise given for incentive though, done my own like Rob.