Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Search found 1166 matches

Author: kev edwards
Sat Mar 23, 2024 4:24 pm
Forum: Bike Help
Topic: z1000 a2
Replies: 8
Views: 353

Re: z1000 a2

so easy to tell just by looking at rear footrest hangers thou A's are unique to the model.
Author: kev edwards
Sat Mar 23, 2024 12:43 pm
Forum: For Sale
Topic: Z1000 A2/D and ltd fork legs, z1000Carbs
Replies: 0
Views: 108

Z1000 A2/D and ltd fork legs, z1000Carbs

Z1000 A2/D and ltd fork legs, z1000 slightly modified improved 26mm pumper Carbs. Z1000, pumpers, fork legs clutch pack, sprocket cover dampening, used speedo and throttle cables,rear wheel adjuster bolts and nut, 2 brake reservoir covers round type, pair of 30 tooth cam sprockets and some front bra...
Author: kev edwards
Thu Nov 30, 2023 8:22 pm
Forum: The Bottom Shed
Topic: VFR400R NC24
Replies: 4
Views: 5208

Re: VFR400R NC24

I had a rothmans nc24, beautiful little bike deristricted a proper little rev monster and handling very good.
Author: kev edwards
Mon Sep 11, 2023 9:13 pm
Forum: Bike Help
Topic: Anyone running boyer ignition?
Replies: 14
Views: 22543

Re: Anyone running boyer ignition?

Warren contact Boyer, they are pretty good to deal with and are just outside Maidstone, I've used a lot of Boyers over the years and never had problems, check the pick up for resistance to eliminate it, chances are at some stage the box has been wired up wrong and could be toast.
Author: kev edwards
Mon Jul 17, 2023 6:01 am
Forum: Bike Help
Topic: Cam Chain Rivet Tool
Replies: 4
Views: 1592

Re: Cam Chain Rivet Tool

ball pein hammer
Author: kev edwards
Mon Jul 17, 2023 5:58 am
Forum: Bike Help
Topic: Cam Chain Link Options
Replies: 2
Views: 1438

Re: Cam Chain Link Options

As Al says go with the soft link, i have done many like tis and never had any problems.
Author: kev edwards
Thu Jun 15, 2023 3:53 pm
Forum: Bike Help
Topic: Voltage at Battery z900A4
Replies: 4
Views: 1263

Re: Voltage at Battery z900A4

Short answer is no, probably regulator rectifier issue.
Author: kev edwards
Sat May 27, 2023 12:51 pm
Forum: Bike Help
Topic: Carbs
Replies: 7
Views: 1624

Re: Carbs

If a2 they will have a vacuum stubb on number 3 carb.
Author: kev edwards
Sun May 14, 2023 4:57 pm
Forum: Bike Help
Topic: Cannot use choke even when cold
Replies: 2
Views: 1736

Re: Cannot use choke even when cold

Took the carbs back off after trying with air scews 2 and 1/2 turns out, did not realise I had weakened it off that much, still sooting up, for some reason I had put 17.5 pilots in, probably because I had the same size in the 26 pumpers I had on, so back to 15 pilots, air screw 1 and 3/8th's out fir...
Author: kev edwards
Fri May 12, 2023 6:12 am
Forum: Bike Help
Topic: Cannot use choke even when cold
Replies: 2
Views: 1736

Cannot use choke even when cold

I have refurbed 28mm pumpers, plungers done bt Z1015, jetting is stock , will fire up on choke but have to turn off immediately, if I keep it lifted it stops the motor, once warmed idles and runs perfectly with light tan plugs, seems it does not like choke even if I only have it partially on, stumpe...
Author: kev edwards
Sat Apr 22, 2023 4:43 pm
Forum: Bike Help
Topic: Mixture screws
Replies: 3
Views: 2103

Re: Mixture screws

I guess you are going to modify a set with the orange.
Author: kev edwards
Fri Apr 21, 2023 9:01 pm
Forum: Bike Help
Topic: Mixture screws
Replies: 3
Views: 2103

Re: Mixture screws

I assume you have the carbs with the mixture screw in lower picture, if so the screw with the o ring will not fit, you either set up carbs and plug holes with anti tamper plugs or modify a set of the top picture air screws and sleeve the hole, I have recently done this myself.
20230224_071927.jpg
Author: kev edwards
Mon Mar 27, 2023 6:19 am
Forum: Bike Help
Topic: z1b carb t pieces
Replies: 9
Views: 2833

Re: z1b carb t pieces

As they are apart if you look in the holes where the middle tee is there would be a 4mm hole in the casting, if not its a pointless tee.
Author: kev edwards
Sat Mar 25, 2023 10:26 pm
Forum: Bike Help
Topic: z1b carb t pieces
Replies: 9
Views: 2833

Re: z1b carb t pieces

By your explanation, you have 3 fuel inlets at the bottom.
Author: kev edwards
Fri Feb 24, 2023 8:50 pm
Forum: Bike Help
Topic: Kawasaki Z1/Z900 top cam roller DIY repair guide
Replies: 20
Views: 5431

Re: Kawasaki Z1/Z900 top cam roller DIY repair guide

I would be afraid to put that back in my bike, praise given for incentive though, done my own like Rob.
20210816_202803.jpg

Go to advanced search