Hi John
I would be interested in 2 sets if you have any left over and I will include the cost of posting.
Can you let me know if you have any that are not being claimed.

Thanks

Sorry
Forgot to attached the picture of the Fuel Tap Body

Hi
I am looking for the main body of a 73 Fuel Tap as in this picture.
I have the other parts to make a complete Fuel Tap of a 72/73 Z1.
I am hoping someone might have one spare not in use.

Thanks

Thanks Z1bman
I will have a go at it tomorrow.

Regards

Hi Guys
Thanks for getting back to me, I will try the ideas you have and see how I get on.
I am not great at soldering, do you know where I might get a same size length of brass pipe.

Regards Irishkev

Hi I have a Z1 73 Black Fuel Tap with an unusual crack in the brass pipe. In the attached pic you can see can see the length of the crack in the pipe. My question is can the brass pipe be removed and replaced without damaging the Fuel Tap. How can I remove the pipe and re install a new one and make ...

Moved to bike help

I have a loom and some other electrical cables from a z1 900 73 on which the black outer material has dried out and is breaking and rumbling away when I handle them. Does anyone know is it possible to have the loom recovered along with the other cables which are for the two handle bar switches and o...

Hi Johny
Thanks for taking an interest in my situation, I will most certainly tread carefully and take on board your advise as i know the margins of errors are tight. I have the cylmer manual and I will make sure i have covered all aspects.

Thanks Irishkev

Hi z1bman
When you say with the timing mark on the advancer is that the T mark.

Thanks

Hi Warren,
Are you saying the T mark beside the F mark is the one to line it up to.

Hi All
I have a 72 Z1 900 and I am looking to set the camshaft timing. I don’t have the original advancer unit for it. I am using the following advancer unit (see attachment). Can anyone tell me what timing mark I should use when pistons are top dead centre.

Thanks Irishkev

Hi Paul
In the Gran Canaria, home next Saturday

Thanks Paul

Hi Wayne
I am heading off tomorrow and won't be back until the Sat 14th Sept.
I will definitely take it if you decide to relist. I will try to log on while away.

Thanks

Philippe
The attached show the left hand switch body and the internal component for the USA switch.
It only has 3 wires attached as per screen shot. Hopefully this do not cause more confusion.
This is the component I am looking for if possible.

Thanks