Hi Grog, thanks for that, I will look at the other option as well. I would like to make it much lighter. If possible,
Also trying to keep the bike looking correct.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Search found 91 matches
- Thu Jan 11, 2024 10:29 pm
- Forum: Bike Help
- Topic: Hydraulic clutch conversion ?
- Replies: 10
- Views: 36336
- Mon Jan 08, 2024 11:32 pm
- Forum: Bike Help
- Topic: Hydraulic clutch conversion ?
- Replies: 10
- Views: 36336
Hydraulic clutch conversion ?
Hi Folks, has anyone ever converted a standard clutch to the above. if so does a kit exist, or parts like a slave cylinder off another another bike. I know a dedicated one will be impossible to find, but willing to do some converting. Its to go on a Z1R . Thanks in advance.
- Sun Nov 05, 2023 8:31 pm
- Forum: Bike Help
- Topic: Correct cam positions for top end re-build.
- Replies: 5
- Views: 4331
Re: Correct cam positions for top end re-build.
many thanks Gray
- Sun Nov 05, 2023 7:55 pm
- Forum: Bike Help
- Topic: Correct cam positions for top end re-build.
- Replies: 5
- Views: 4331
Re: Correct cam positions for top end re-build.
Many thanks Z1015 , Christ I had to use a magnifying glass to find this little mark. Almost hiding behind the rubber damper on the cam sprocket. I did forget to mention, this is for a Z1R. don't suppose its any different.
- Fri Nov 03, 2023 11:25 pm
- Forum: Bike Help
- Topic: Correct cam positions for top end re-build.
- Replies: 5
- Views: 4331
Correct cam positions for top end re-build.
Hi folks, just about to put my cams back in after a top end re-build. inlet cam is obvious with the number 28 in a vertical position. But the exhaust cam !!! I have the Clymer manual and it's not a lot of help :!: :!: it looks to me this could be put in 180 degrees out :?: I'm sure when it took it a...
- Wed Aug 09, 2023 2:01 pm
- Forum: Bike Help
- Topic: Z1r Re bore sizes
- Replies: 3
- Views: 972
Re: Z1r Re bore sizes
Thanks very much
- Tue Aug 08, 2023 9:04 am
- Forum: Bike Help
- Topic: Z1r Re bore sizes
- Replies: 3
- Views: 972
Z1r Re bore sizes
Hi Guys, anyone point me in the right direction for ring gap and piston and bore clearance. For a 0.50 over sized re-bore. I've just had it done but before re-assembly I want to be 100% sure. As it all seems very tight to me !!!!
Thanks in advance for your help.
Thanks in advance for your help.
- Mon May 29, 2023 7:19 pm
- Forum: Bike Help
- Topic: Dyna coils and Ballast resistor
- Replies: 2
- Views: 475
Re: Dyna coils and Ballast resistor
Many thanks for the reply
- Sun May 28, 2023 10:28 pm
- Forum: Bike Help
- Topic: Dyna coils and Ballast resistor
- Replies: 2
- Views: 475
Dyna coils and Ballast resistor
Hi Guys, some years ago i fitted the Dyna S electronic ignition to my Z1R. Recently i decided to fit Dyna coils, that I have done. But it tells you in the instructions, when you are using the Dyna s ignition with the Dyna coils, to remove the Ballast resistor ???? so i have just un-plugged it and re...
- Sat Aug 27, 2016 11:29 pm
- Forum: Wanted Adz
- Topic: z1r Carbs
- Replies: 6
- Views: 4014
- Sat Aug 27, 2016 8:06 pm
- Forum: Wanted Adz
- Topic: z1r Carbs
- Replies: 6
- Views: 4014
z1r Carbs
Hi Guy's either original type, or flat sides. Please PM me if you have either for sale. Need to be in fair condition.
- Fri Jul 01, 2016 8:14 pm
- Forum: Wanted Adz
- Topic: Emulsion tubes Z1r
- Replies: 0
- Views: 1395
Emulsion tubes Z1r
Looking for a set of emulsion tubes. Or if anyone knows where I can get a new set. Cheers
- Fri Jul 01, 2016 6:35 pm
- Forum: Bike Help
- Topic: Z1300 cam chain adjuster, ANY help please
- Replies: 4
- Views: 3212
- Fri Jul 01, 2016 7:56 am
- Forum: Bike Help
- Topic: Z1300 cam chain adjuster, ANY help please
- Replies: 4
- Views: 3212
Many thanks the zzr 1100 tensioner will bolt straight in it is a different profile to the one on your bike but fits perfectly. use a new gasket for the zzr100 though you should remove the cam cover to check the valve timing is correct if its a later zg fuel injection model the have an oil feed pipe ...
- Thu Jun 30, 2016 7:06 pm
- Forum: Bike Help
- Topic: Z1300 cam chain adjuster, ANY help please
- Replies: 4
- Views: 3212
Z1300 cam chain adjuster, ANY help please
Hi Guy's, need to change the adjuster, I have the official workshop manual but this helps me not as I'm fitting the one from a zzr 1100. Need to know procedure for removal of old one and replacement of the new one. Any help please. I have been on some US sites but it's like the blind leading the bli...