Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Search found 2920 matches
- Thu Apr 18, 2024 8:46 am
- Forum: Bike Help
- Topic: Z900 A4 fuel leak any ideas please?
- Replies: 112
- Views: 2534
Re: Z900 A4 fuel leak any ideas please?
I'm not sure if its some form of optical illusion but, as Zed9 says the lower inlet cam shell appears distorted or not supported (can be seen in the first/top photo). It almost looks as tough some of the casting is missing? That's the shell location tab which prevents it from spinning in the journa...
- Wed Apr 17, 2024 6:06 pm
- Forum: Bike Help
- Topic: GPZ 1100 starter
- Replies: 3
- Views: 83
Re: GPZ 1100 starter
Yes! J/GPZ 998cc/1089cc starters are all the same 4 brush type.
- Wed Apr 17, 2024 9:38 am
- Forum: Bike Help
- Topic: Shim adjustment
- Replies: 5
- Views: 144
Re: Shim adjustment
The head needs to come off and the valves need tipping at the very least. 0.30mm can be ground off the stem to get you in the 220 ish range but you will soon run out of adjustment and really need to be in the thicker end of the shim range which can be achieved by skimming the collets and retainers a...
- Sat Apr 13, 2024 5:53 pm
- Forum: Bike Help
- Topic: Z900 A4 fuel leak any ideas please?
- Replies: 112
- Views: 2534
Re: Z900 A4 fuel leak any ideas please?
What i cant understand is my T pieces are brass, the o rings are set in the grooves and once carbs are fitted to the bracket cant move, so either thats the way they've been made or somethings shrunk which isnt possible, unless their the wrong T pieces for the carbs? If they are brass they are non s...
- Wed Apr 10, 2024 10:30 pm
- Forum: Bike Help
- Topic: Z900 A4 fuel leak any ideas please?
- Replies: 112
- Views: 2534
Re: Z900 A4 fuel leak any ideas please?
Keyster kits for the Kawasaki Z and Suzuki GS VM carbs work fine.
I have used Keyster kits intended for the VM28's to replace the entire internals on VM26's i have bored out to 30mm and they have performed faultlessly..
I have used Keyster kits intended for the VM28's to replace the entire internals on VM26's i have bored out to 30mm and they have performed faultlessly..
- Sat Apr 06, 2024 5:04 pm
- Forum: Bike Help
- Topic: backfiring
- Replies: 12
- Views: 488
Re: backfiring
The 0.05mm to 0.10mm clearances are the old specs which were revised to 0.10mm to 0.15mm due to instances of valve seat burning, especially on the exhausts
They should be kept as close as possible to the upper figure of 0.15mm and never let to get below 0.10mm.
They should be kept as close as possible to the upper figure of 0.15mm and never let to get below 0.10mm.
- Fri Apr 05, 2024 10:55 pm
- Forum: Bike Help
- Topic: backfiring
- Replies: 12
- Views: 488
Re: backfiring
Thanks for all the ideas. I have lifted the top off, and all of the valve gaps are between 0.07 and 0.1mm. Valve clearances are on the tight side. The should be 0.10mm minimum and ideally 0.15mm. Whenever they get down to 0.10mm they need the next thinnest shim.. Backfiring and loss of power under ...
- Fri Apr 05, 2024 10:52 pm
- Forum: Bike Help
- Topic: ZRX forks pre-load adjustment
- Replies: 7
- Views: 280
Re: ZRX forks pre-load adjustment
Those preload adjusters don't alter the uncompressed length of the forks BUT they do reduce sag by preloading and consequently stiffening the springs so do affect the ride height of the suspension.
They also do make a noticable difference to the front end firmness and resistance to dive.
They also do make a noticable difference to the front end firmness and resistance to dive.
- Wed Apr 03, 2024 4:47 pm
- Forum: Bike Help
- Topic: z900A4 LEDAR Air Corrector Kit - Main Jet Size
- Replies: 2
- Views: 168
Re: z900A4 LEDAR Air Corrector Kit - Main Jet Size
Up a couple of sizes from stock.
- Tue Apr 02, 2024 2:53 pm
- Forum: New Here?
- Topic: Back again
- Replies: 9
- Views: 41491
Re: Back again
Hi Mikey, I tried to send you a PM but it's stuck in my outbox but won't send !!!!!!! I've contacted Admin about this issue, but no reply yet. Can you drop me a pm if you read this? Cheers :D PM's stay in your outbox until they get read. If you click on a members profile you can see the last time t...
- Tue Apr 02, 2024 2:23 pm
- Forum: Projects
- Topic: Double the troublezz. AMA style Racecrafters Z1000 and Moriwaki Z1R Turbo.
- Replies: 236
- Views: 1676975
Re: Double the troublezz. AMA style Racecrafters Z1000 and Moriwaki Z1R Turbo.
Stopped raining for a couple of hours so had a chance to get it out and stand back for a proper look in the fresh air and daylight for the first time. SUNP0564.JPG SUNP0565.JPG SUNP0568.JPG Outrigger plate finished, painted and the clutch slave rebuilt ready for its hose and bleeding once the new s...
- Mon Apr 01, 2024 11:57 am
- Forum: Bike Help
- Topic: What is this?
- Replies: 4
- Views: 151
Re: What is this?
Stopper for the kickstart pawl.
It bolts in the upper crankcase.
It bolts in the upper crankcase.
- Sat Mar 23, 2024 6:15 pm
- Forum: Projects
- Topic: Double the troublezz. AMA style Racecrafters Z1000 and Moriwaki Z1R Turbo.
- Replies: 236
- Views: 1676975
Re: Double the troublezz. AMA style Racecrafters Z1000 and Moriwaki Z1R Turbo.
Dyna HT leads done today. SUNP0549.JPG Top pair of coils are cylinders 2 and 3. SUNP0559.JPG And bottom 1 and 4. SUNP0558.JPG Each coil serves a pair of cylinders as usual so that if a coil fails you don't drop on to three. SUNP0563.JPG Been using the green Sparkrite lead crimper for years which is...
- Fri Mar 22, 2024 6:54 pm
- Forum: Projects
- Topic: Double the troublezz. AMA style Racecrafters Z1000 and Moriwaki Z1R Turbo.
- Replies: 236
- Views: 1676975
Re: Double the troublezz. AMA style Racecrafters Z1000 and Moriwaki Z1R Turbo.
Another major step towards the finish line this week with the wiring completed... Nearly as basic as possible with starter solenoid and 3O amp fused feed to 30 amp toggle switch for main power . The charging system, reg/rec etc is a stand alone circuit. SUNP0535.JPG The white four pin connector blo...
- Thu Mar 21, 2024 11:15 pm
- Forum: Bike Help
- Topic: Will 1.015L barrels fit z900 bottom
- Replies: 2
- Views: 181
Re: Will 1.015L barrels fit z900 bottom
Yes!
The 900 and 1000 cases are pretty much identical apart from the case mouths which you have enlarged already.
Deck heights and even the heads are basically the same..
The 1000 is just a bored out 900.
The 900 and 1000 cases are pretty much identical apart from the case mouths which you have enlarged already.
Deck heights and even the heads are basically the same..
The 1000 is just a bored out 900.