Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Search found 1667 matches

Author: zed1015
Thu Apr 19, 2018 8:45 am
Forum: Wanted Adz
Topic: GPZ1100 UNITRACK CAMS.
Replies: 3
Views: 52

Re: GPZ1100 UNITRACK CAMS.

Yes! Julian, Thanks. I know both are the same. I already have one set for my turbo and they have R7/R8 and I want another set for the Supercharged. I seem to remember that they can have any "R" number on them and the letter "A" cast next to the blank where the tacho worm would be...
Author: zed1015
Thu Apr 19, 2018 7:52 am
Forum: Wanted Adz
Topic: GPZ1100 UNITRACK CAMS.
Replies: 3
Views: 52

GPZ1100 UNITRACK CAMS.

GPZ1100 Unitrack cams wanted.
Usually have R7/R8 stamped on them.
Have Z9/1000 stuff to trade/px if required.
Author: zed1015
Wed Apr 18, 2018 5:01 pm
Forum: New Here?
Topic: not exactly new but not used for a while
Replies: 2
Views: 77

Re: not exactly new but not used for a while

Hi. Most pictures can't be seen because they are links to Photobucket and that site has blocked the links unless the user pays around £400 which is a joke hence very few pics, especially the older ones in projects etc. There is an APP though that works with Google Chrome that allows them to be seen ...
Author: zed1015
Mon Apr 16, 2018 2:39 pm
Forum: Bike Help
Topic: Dyno run.
Replies: 5
Views: 91

Re: Dyno run.

If it's running really well and the plugs are a good colour i'd save your money and the ordeal of hearing the bike scream.. Dyno is all very well but once tuned for peak power they tend to end up being set on the weak side once back on the road and need re-jetting anyway, so you're back to where you...
Author: zed1015
Mon Apr 16, 2018 1:33 pm
Forum: Projects
Topic: My Ultimate Zed
Replies: 187
Views: 36652

Re: My Ultimate Zed

Zomerset Zed wrote:Stafford show as in this weekend coming up?


No! it will be the one 2nd weekend in October.
Author: zed1015
Mon Apr 16, 2018 10:23 am
Forum: Bike Help
Topic: Rear Disc Bobbins / Buttons.
Replies: 4
Views: 63

Re: Rear Disc Bobbins / Buttons.

Stainless ones on ebay from Blackshadow.
List says fits some EBC's.
Need to measure your old ones to make sure of the size.
https://www.ebay.co.uk/itm/Motorcycle-f ... 2417199421
Author: zed1015
Sun Apr 15, 2018 6:06 pm
Forum: Bike Help
Topic: How do you repair / remove plugs / sockets from the coloured wiring connectors?
Replies: 3
Views: 99

Re: How do you repair / remove plugs / sockets from the coloured wiring connectors?

On the back of each crimped pin/spade there is a small sprung tag that locks in to the connector block OR a similar plastic tag on the block that locks on to the spade. You need to push the tag back towards the spade or block to release it. I use a pin or flattened piece of thin welding rod for the ...
Author: zed1015
Sat Apr 14, 2018 9:16 pm
Forum: Projects
Topic: HowieD's 'arris
Replies: 120
Views: 37632

Re: HowieD's 'arris

Shouldn't have a problem with stainless valves ,they are superior to the stock items and are one piece not two. Which valves have you bought. Some of those cheap £90 a set pattern valves have issues where the stem is too long with the collet groove slightly higher up the stem leading to problems wit...
Author: zed1015
Sat Apr 14, 2018 6:19 pm
Forum: Projects
Topic: HowieD's 'arris
Replies: 120
Views: 37632

Re: HowieD's 'arris

Not sure why a valve would bend after about 18 miles (total) of running - any ideas ???? More updates in less than a year (hopefully). H :idea wie If it's just the one valve and everything else, timing, springs etc check out ok then you need to check the guide clearance. If that one is slightly on ...
Author: zed1015
Sat Apr 14, 2018 5:27 pm
Forum: For Sale
Topic: Solid idler sprockets to trade.
Replies: 0
Views: 73

Solid idler sprockets to trade.

Just made another batch of solid idlers and have a spare set of 3 up for trade. They are the ones in the foreground, use original Z sprocket rings with billet alloy centres, have new bearings and use the early top bracket which will fit in any Z1 to Z1000 camcover and are lighter than Liska etc. I'm...
Author: zed1015
Fri Apr 13, 2018 10:45 pm
Forum: Wanted Adz
Topic: Z650 camchain roller tensioner bracket.
Replies: 4
Views: 186

Re: Z650 camchain roller tensioner bracket.

Z1parR wrote:Or three :D

Yes i've got one mate , the same one that's on the left in your pic .
Let me know if you want me to send it , i've got your details .
Or i can bring it to the Yorkshire rally if you're in no mad rush .


PM sent..
Author: zed1015
Fri Apr 13, 2018 6:28 pm
Forum: Bike Help
Topic: 1170 conversion
Replies: 2
Views: 97

Re: 1170 conversion

Do you mean you have a 998 J engine ( no provision for kickstart ) with Yoshi pistons or a bored out 900 block on a 1000 bottom ( with provision for a kickstart) ? 1170 is the overbore for the 1000J or GPZ 1100 when using GPZ1100 barrels and this is not a simple fit to the early engine. If you have ...
Author: zed1015
Tue Apr 10, 2018 5:22 pm
Forum: Wanted Adz
Topic: Z650 camchain roller tensioner bracket.
Replies: 4
Views: 186

Re: Z650 camchain roller tensioner bracket.

Bump.
Author: zed1015
Fri Mar 16, 2018 11:00 am
Forum: Wanted Adz
Topic: 66mm sleeves or info
Replies: 2
Views: 140

Re: 66mm sleeves or info

Westwood liners will make them
https://www.westwoodcylinderliners.co.uk/
or £55 each + customs etc from Webike
or i have a used 900 block on stock bores (with 3 pistons) which may just take a hone to run std pistons, £100 or trade for a 1015 block under 72mm.
Author: zed1015
Thu Mar 15, 2018 12:17 pm
Forum: Bike Help
Topic: Sleeve removal
Replies: 1
Views: 117

Re: Sleeve removal

Phil. Don't cold press them out, it will cause a slack fit with the new liners. You need to heat the barrels and the liners will slide out. I put them in the oven or under the grill but you can carefully use a blow torch or hot air stripper. When warm enough the block will slide down the liners and ...

Go to advanced search