Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Search found 183 matches
- Thu Dec 16, 2021 10:36 pm
- Forum: Bike Help
- Topic: GPZ1100B2 Ohlins Shocks / Others ?
- Replies: 16
- Views: 8982
Re: GPZ1100B2 Ohlins Shocks / Others ?
I've just fitted a pair of standard showa cb1300 shocks to my B2. They are a bit longer than standard, fit straight on without mods and work really well, I had Konis on it before and they were good but these look more Lawsony!
- Tue Apr 14, 2020 1:48 pm
- Forum: Bike Help
- Topic: gpz1100 hydraulic clutch
- Replies: 1
- Views: 1379
gpz1100 hydraulic clutch
Hi All,
I am wanting to fit a hydraulic clutch conversion on the cheap. I have a spare sprocket cover and want to bolt on to the outside a suitable slve cylinder. Anybody else done it this way and can recommend a suitable cylinder?
Thanks
Dave
I am wanting to fit a hydraulic clutch conversion on the cheap. I have a spare sprocket cover and want to bolt on to the outside a suitable slve cylinder. Anybody else done it this way and can recommend a suitable cylinder?
Thanks
Dave
- Sun Mar 22, 2020 1:18 pm
- Forum: Wanted Adz
- Topic: GPZ1100 head
- Replies: 2
- Views: 1797
Re: GPZ1100 head
I've got one, pm me if you still need one, i can take some photos - cant send it out for a week as my wife has the virus and were self isolating!
- Mon Feb 10, 2020 8:42 pm
- Forum: Bike Help
- Topic: Refurbished crank problems
- Replies: 8
- Views: 4059
Re: Refurbished crank problems
Spoke to crank company today, they recomended honing too but suggested i made my own tool out of 1/2in ally tube with a slot cut in it to allow some 120 grit wet and dry to be wound round to the diameter of the gudgeon pin then inserted into the small end and spun up good and fast on my drill while ...
- Sun Feb 09, 2020 2:44 pm
- Forum: Bike Help
- Topic: Refurbished crank problems
- Replies: 8
- Views: 4059
Re: Refurbished crank problems
Yes good advice thank you. its well out of my comfort zone, theres a few places round here I can try.
Thanks again
Dave
Thanks again
Dave
- Sun Feb 09, 2020 1:00 pm
- Forum: Bike Help
- Topic: Refurbished crank problems
- Replies: 8
- Views: 4059
Re: Refurbished crank problems
New Rods by the look of it. What honing tool do I use? So far smallest ball type hone I have located on the internet is 20mm - is that too big for my 17mm small ends.
Thanks for your help
Thanks for your help
- Sun Feb 09, 2020 11:50 am
- Forum: Bike Help
- Topic: Refurbished crank problems
- Replies: 8
- Views: 4059
Refurbished crank problems
Had my crank refurrbished recently, new everything plus balance and weld. Done by a reputable engineer. Built the bottom end back up, all good. Turned it over to pop on the pistons only to find No4 conrod small end is too tight. It's not the gudgeon pin as I swapped this with other rods and no issue...
- Sun Feb 09, 2020 11:38 am
- Forum: Bike Help
- Topic: gpz1100 MLS Cometic head gasket
- Replies: 8
- Views: 4091
Re: gpz1100 MLS Cometic head gasket
Thanks Al, sorted with that but got other probs that mean the motot cant go back ytogether yet.
- Wed Jan 29, 2020 7:29 pm
- Forum: Bike Help
- Topic: gpz1100 MLS Cometic head gasket
- Replies: 8
- Views: 4091
Re: gpz1100 MLS Cometic head gasket
Thanks all - no one was answering their phone today so will try again tomorrow. This gasket is for my old B2 motor - the engine I was having all the trouble with now has a MLS gasket in it and has remained leak free for quite some time, long may that continue.
- Tue Jan 28, 2020 8:41 pm
- Forum: Bike Help
- Topic: gpz1100 MLS Cometic head gasket
- Replies: 8
- Views: 4091
gpz1100 MLS Cometic head gasket
Hi Folks, I need a new multi layer steel head gasket for my Gpz1100 with 1170 big bore kit, where is the best (cheapest) place to buy one these days?
Thanks
Dave
Thanks
Dave
- Wed Oct 31, 2018 9:09 pm
- Forum: Bike Help
- Topic: Anyone help?
- Replies: 6
- Views: 3257
Re: Anyone help?
H Ralph, my gpz11, with z1100 carbs is sitting in the shed doing nothing so anything you need to borrow let me know.
Dave
Dave
- Sun May 20, 2018 4:22 pm
- Forum: Wanted Adz
- Topic: 84 Z1100R
- Replies: 5
- Views: 3544
Re: 84 Z1100R
That'll be the postage covered then. I will send photos tomorrow.
Cheers
Dave
Cheers
Dave
- Sat May 19, 2018 9:29 pm
- Forum: Wanted Adz
- Topic: 84 Z1100R
- Replies: 5
- Views: 3544
Re: 84 Z1100R
Hi, I have one, but they are extremely rare. Hence it will be hideously expensive! Do you want me to send a picture and a price? Dave
- Sun May 06, 2018 4:09 pm
- Forum: Bike Help
- Topic: 1170 cometic headgasket
- Replies: 8
- Views: 4525
Re: 1170 cometic headgasket
Well just over a year has passed and I finally have an oil tight motor! I thought I should update the thread with my new found knowledge! I fitted the multilayer steel gasket with silicone in the cam tunnel as before, this time however before fitting the gasket I didnt just clean the mating surfaces...
- Sun May 06, 2018 9:27 am
- Forum: Track Days & Race Meets
- Topic: 2018 Donnington 4 Hour Endurance.
- Replies: 10
- Views: 15369
Re: 2018 Donnington 4 Hour Endurance.
Ive had a few last minute running issues with my bikes as usual but at the moment they are fixed and running well. Who is going from here? I will be heading up Friday hoping to get there late afternoon - I couldn't work out from the map the spot everyone congregated at last year but I will head in t...