Very nice indeed .

Got any close up pics of the re-inforcement for the front end?
Some serious forces going on there soon enough .

LTDTOM wrote:
Thanks everyone, are there many LTD bike in the UK?

Hello - a few of us have them...

Very nice - a treasure

Not really sure if I need to take the studs out or not - they seem pretty good - took this pic for reference given there are three different lengths. Not unless they are damaged/corroded or the vapour blaster prefers them out. I can't see why you couldn't mask them with heatshrink to protect them f...

Battery Earth.

Not got any used ones, but they are available from Cradley.
Unusual head on these, hex with screwdriver drive.

1 X 92001-164 Bolt Hex Head M6X35 £2.50ea
1 X 92001-1352 Bolt Hex Head M6X22 £2.16ea
1 X 92001-165 Bolt Hex Head M6X45 £2.38ea

I run a tap down the hole and a die down the stud, two nut trick works well, seat the stud short thread in - until no thread is showing.

I use alumslip and no loctite, stainless stud kit.

Yamaha 2F31496800 looks very similar, CMSNL have 2 at the mo.

Ticking the mods off the list. The new loom is now finished, I fitted a spade type fuse box for ease and convenience. The coils and headlamp are powered by micro relays which are tidily tucked away out of sight. Pattern Reg/Rec from Zpower was giving some strange voltage outputs - this has now been ...

Morning Mikey, purchased this bad boy from Z Fever - nice and bright, H4 bulb.

Try going up one heat grade on the plugs, it sounds like the plugs are overheating as you get up to temperature.

Sorry GUS been out - yes that's where I got them from.
Japanese bullet terminals.

So, I got side tracked again. The modifications seem to progress in a haphazard fashion.... The Ltd wiring was a bit of a pain, the Ltd handlebars have the wiring running through them, the standard bars do not. The Doremi Z1 harness I had bought for this mod was adapted to fit. I'm using pattern swi...

Debbens do good quality ones.

258 0-6 is the mikuni reference.