Pics

hi z1bman, I believe its a z1b, but it has had welded on it the bracket for a rear master cylinder to change from a drum brake to a disc, but the spoke wheels a have with it are also for a rear disc aswell as the alloys on it. it has twin front discs and has a 1000 a2 engine in it. its a bit of a bi...

hi again, the red/yellow wire under the tank area which is a double female connector is live when the ignition is on. but when I connesct it to the coils as a live feed the motor doesn't turn over off the button. it only turns over off the button when I have the live feed from the starter solenoid t...

ive got no spark at all now, and the starter button only turns the motor when I put a live to the coils

hi again, I have had the starter switch apart the red/yellow wire is 12v when the ignition is on, and the black is 12v when the button is pressed, the red/yellow wire to the starter button is 12v in the run position and 0v in the off position, so I believe the switch gear is ok

hi again, yes ive got an old switch which im hoping to tryover the weekend as ive been away with work. however ive had the dynacoils checked and 1 is duff, but I think 1 of the pickup coils might be duff too. ive go an old set off good checked coils off my z1000j to try on this bike, can you tell me...

thanks guys ive just realised its gone onto two pages this post lol, ill take all the piss take on the chin tho lol. im going to check as you guys have advised in the last few post and all the help is much appreciated . hopefully tomorrow night after work. ill keep you all informed. cheers frizzy

hi guys, ive checked the live lead to the coils too and its only live when the starter button is pressed, this has got my head done in and im sure it will be staring me in the face… back to study the wiring diagram again lol

hi again, I disconnected the box connector for the r/h switches, turned on the ignition the red/yell wire was zero reading but the brown was 12v. any ideas?

hi guys, checked out the switch, im still no further forward. any more ideas? I fell this problem will be simple and staring me in the face. but it has me baffled

also guys the switches are new, but I will take the starter switch apart for further inspection

thanks for the intrest guys, first of all, the owner provided a new loom as the old one had been butchered. then I had to get a new middle loom and rear loom and then ignition switch. its a 4 wire ignition switch. the colours of the wires on each junction box are the same colours going in and out. a...

checked the switch guys, and seems to be ok, i'm still bamboozled , any more thoughts????

Thanks. I'll try that

hi guys, I could do with a bit of help. I'm doing a good mate a favour, for his poorly brother inlaw who suffers from demensure . I'm trying to get his bike running, ive replaced the wiring harness all 4 parts of it including a new ignition switch, the 4 wire one. ive eventually getting it to turn o...