I've just bought a brand new set of MIKUNI RS 34 for my 1100r
Bike runs great but when it's hot fuel runs out of the overflows on two and three I've checked and clean the float pins twice but it's still happening ..has anyone had this regards richy..

Cheers AL I've got standard zrx1200 bars on hope there is enough room regards richy..

Ok I've got some rs34 flatslide carbs on the way
Also a pull push throttle kit .. question is will it fit with the original switch gear or is it best to fit another throttle tube and switch gear from something else.. regards richy

Thanks AL sound advice one again regards richy..

I'm going to be fitting Dyna s ignition to my z1100r this runs the gpz1100 unitrak engine
I know I need a mechanical advancer off a 1000j ect I think the part number is 21148-1020 plus the bolt and washer
Question is do I need a 1000j pick up casing and cover

Hi AL great advise again ..when I've bought the carbs may need advice on fitting Dyna ignition system one thing at a time if I'm going to do it might as well do it rite regards Richy..

Do these come with a vacuum take off for the fuel tap

Hi I know this is an old post but appreciated
I'm thinking of rs34 for my z1100r it's standard motor with Harris pipe
Any idea what main jet to use and air filters looking to try and get this set up quickly and easily regards richy..

Great advice from all just need deep pockets now regards richy..

Hi AL thanks for the advise I'm going to investing in a set am correct on choosing the rs34 as some use rs36 or rs38

Thanks for the help

Will I need to change the inlet rubbers..also will I need a pull push throttle kit

I'm now thinking of a set of flatsides for my z1100r which runs the unitrak motor ..which ones are best for easy set up..
I'm thinking rs34 with velocity stacks..I'm also running a full Harris exhaust..any help appreciated regards richy..

Kind regards for the help

Thanks I will look into this site