My drills ain't doing it! Not sure I trust just loctite.

Whilst the Z1000 project is ongoing I've been a bit rash and got a KZ650B i978, just changing the chain and sprockets the old front sprocket has a hole for the tab washer to fit into the new sprocket has no hole. Any known fixes?

Bought a set of pistons from Zpower back in 2013, just looking at fitting them in (it's a long project!) second ring has a recess running round the inside edge, which way round does this go? Recess to the top or bottom?

The replacement disc arrived with an alloy spacer in place, removed that, and put it on the wheel and it all fits :D so now have a basic rolling chassis! Next up sorting the brakes, just going to rebuild the standard stuff for now. Then to sort the engine, (barrels off for rebore at the moment), and...

Thanks for the input much appreciated

Mmm! I have a bit of a bits and pieces bike I'm putting together from various parts I've assembled over the years! I have some A2 spoked wheels, didn't have a swing arm so got a second hand one, put it all in the frame everything fits well, until I put the disc on, it seems to bind on the rear calli...

Do the front and rear discs on the A1/A2 Z1000 have the same dish depth?

Thanks guys, it's off and not too bad really. So I think it can be sorted with a little time etc. Electrics not my strong point but I'll have a go!

Ok thanks will give them a call tomorrow. It's gotta come off anyway so I'll have a good look at it when it's off.

Hi All, I've just got back in the fold and bought a rather tired Z1000ST, the wiring looks past it's best! All sorts of connectors and taped and cut wires etc! Does anyone know where I can get a replacement wiring loom from?

Thanks