This explains it clearly Al. Follow the arrow directions. I've had this conversation with Graham previously.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Search found 1884 matches
- Sun Apr 28, 2024 12:00 pm
- Forum: Bike Help
- Topic: Z900 A4 fuel leak any ideas please?
- Replies: 150
- Views: 4960
- Sun Apr 28, 2024 10:02 am
- Forum: Wanted Adz
- Topic: Speedo/Tacho seal Z900A4
- Replies: 2
- Views: 34
Re: Speedo/Tacho seal Z900A4
Just cut a new one from an old inner tube. If you don't have one your local tyre fitters will have plenty in the rubbish bin.
- Sat Apr 27, 2024 5:45 pm
- Forum: New Here?
- Topic: New Bloke From Kent
- Replies: 6
- Views: 112
Re: New Bloke From Kent
Glad you made it nik
- Sat Apr 27, 2024 5:41 pm
- Forum: Bike Help
- Topic: Z900 A4 fuel leak any ideas please?
- Replies: 150
- Views: 4960
Re: Z900 A4 fuel leak any ideas please?
Fingers crossed.
- Sat Apr 27, 2024 5:28 pm
- Forum: Bike Help
- Topic: Z900 A4 fuel leak any ideas please?
- Replies: 150
- Views: 4960
Re: Z900 A4 fuel leak any ideas please?
Yeah, the ones without are pointless (excuse the pun )
- Sat Apr 27, 2024 4:52 pm
- Forum: Bike Help
- Topic: Z900 A4 fuel leak any ideas please?
- Replies: 150
- Views: 4960
Re: Z900 A4 fuel leak any ideas please?
r3sc, one proviso, Graham has the replacements that have a adjuster for each points set aswell as adjusting thing the back plate. Many repop plates don't have the adjusters on each set of points.
- Thu Apr 25, 2024 7:15 pm
- Forum: Bike Help
- Topic: Z900 A4 fuel leak any ideas please?
- Replies: 150
- Views: 4960
Re: Z900 A4 fuel leak any ideas please?
Hmmmm, cylinder 1 & 3 looks a little suspicious. 1 being lowish with no oil and 3 having a big increase with oil. Cylinders 1 & 4 are normally fairly equal as are cylinders 2 & 3. Cylinders 2 & 3 are normally a little lower than 1 & 4 as they are in the middle and get less coolin...
- Thu Apr 25, 2024 8:57 am
- Forum: Bike Help
- Topic: Z900 A4 fuel leak any ideas please?
- Replies: 150
- Views: 4960
Re: Z900 A4 fuel leak any ideas please?
Graham, take two reading per cylinder. One cold, throttle fully open, no plugs, cranks the starter until reading stops increasing. Second same as first but with a few ml of oil squirted into the cylinder. A significant increase will show a rings/bore issue. No significant increase but low reading sh...
- Thu Apr 25, 2024 8:36 am
- Forum: Bike Help
- Topic: Ignition loss
- Replies: 12
- Views: 314
Re: Ignition loss
for instantaneous fuse popping your looking for a live feed shorting to ground, however mebe its me but im unsure what the 10a fuse is doin :oops: i.e is it protecting the feed from the relay contacts to the coils or protecting the relay coil from the battery feed either way you have a short to gro...
- Wed Apr 24, 2024 9:54 pm
- Forum: Bike Help
- Topic: Ignition loss
- Replies: 12
- Views: 314
Re: Ignition loss
Well as every fuse you've put in has blown immediately the feed to the coils wouldn't be live so they should be fine.
Did it blow the fuse without turning on the ignition or did it blow as soon as you did?
Did it blow the fuse without turning on the ignition or did it blow as soon as you did?
- Wed Apr 24, 2024 6:45 pm
- Forum: Wanted Adz
- Topic: 73 asymmetric floats
- Replies: 7
- Views: 248
Re: 73 asymmetric floats
How can they have gone heavy? unless they have been punctured?
Would a bit of heat to dry them out and dip in por15 not sort them out?
Correct part number 16031-024? Z fever Germany.
Would a bit of heat to dry them out and dip in por15 not sort them out?
Correct part number 16031-024? Z fever Germany.
- Wed Apr 24, 2024 12:01 pm
- Forum: Bike Help
- Topic: Ignition loss
- Replies: 12
- Views: 314
Re: Ignition loss
Sounds like the relay shorted directly to earth which blew the fuse. That probably means the connectors inside the relay will likely have fused in the closed position. If that's the case once the fuse was replaced, if it didn't blow again immediately, the battery might have already fried. Take a spa...
- Tue Apr 23, 2024 4:08 pm
- Forum: Bike Help
- Topic: Z1000a1. 1&4
- Replies: 16
- Views: 490
Re: Z1000a1. 1&4
Have you got a colour tune David? That'll confirm mixture burn colour are all equal. Timing to both coils the same? Plugs all the same heat range? but that shouldn't affect header temps. Only other thing that could be affecting temp readings of the headers is whether they are twin walled or not but ...
- Sun Apr 21, 2024 8:46 pm
- Forum: Bike Help
- Topic: Z900 A4 fuel leak any ideas please?
- Replies: 150
- Views: 4960
Re: Z900 A4 fuel leak any ideas please?
Graham is the same vac cap that's blowing off or does it vary? For a vac cap to blow off you have positive pressure in the inlet when you should only have zero or negative pressure. If it's the same cap every time then that cylinder must either have a hanging valve or a poor seated valve or pre igni...
- Sat Apr 20, 2024 3:29 pm
- Forum: Bike Help
- Topic: Z1000a1. 1&4
- Replies: 16
- Views: 490
Re: Z1000a1. 1&4
So it is running on 1 & 4 at tickover?