Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Search found 1830 matches

Author: warren3200gt
Thu Mar 28, 2024 12:28 pm
Forum: Bike Help
Topic: Z900 A4 fuel leak any ideas please?
Replies: 34
Views: 461

Re: Z900 A4 fuel leak any ideas please?

When checking the jet sizes look to see how the size is stamped, if they look like second rate stamping, at an angle or generally just naff chances are they are after market dross. Genuine mikuni jets have size and their logo stamped appropriately neatly. If they are after market bin em for sure. If...
Author: warren3200gt
Wed Mar 27, 2024 7:13 pm
Forum: Bike Help
Topic: Z900 A4 fuel leak any ideas please?
Replies: 34
Views: 461

Re: Z900 A4 fuel leak any ideas please?

The ones on the carb sides are airscrews,. So screwing them in richen the mixture and turning them out weakens the mixture.
If you still show rich at 3 turns out your pilot jets are too big. The jet size should be stamped on them. Both pilot and main.
Check sizes and report back.
Author: warren3200gt
Wed Mar 27, 2024 2:37 pm
Forum: Bike Help
Topic: Z900 A4 fuel leak any ideas please?
Replies: 34
Views: 461

Re: Z900 A4 fuel leak any ideas please?

Fingers crossed for you Graham, sure someone will step up, but if they don't the offer is open
Author: warren3200gt
Wed Mar 27, 2024 12:34 pm
Forum: Bike Help
Topic: Z900 A4 fuel leak any ideas please?
Replies: 34
Views: 461

Re: Z900 A4 fuel leak any ideas please?

If you were closer mate or you don't have any volunteers close to you and you would find a courier to get it to Kent I'd happily help you out foc.
As its running it can only be settings assuming all the carb parts are original and in good nick. :up
Author: warren3200gt
Tue Mar 26, 2024 5:41 pm
Forum: Bike Help
Topic: Z900 A4 fuel leak any ideas please?
Replies: 34
Views: 461

Re: Z900 A4 fuel leak any ideas please?

Graham, you have one workshop manual and some toilet paper. Flush the Enid Haynes Blyton copy. Vm 26 carbs are the same as vm24 's bar the throat size in this area. Download a Z650 kawasaki manual for a better idea. You don't need to double washer the valve seat. I assume you have genuine valve need...
Author: warren3200gt
Tue Mar 26, 2024 3:45 pm
Forum: Bike Help
Topic: Z900 A4 fuel leak any ideas please?
Replies: 34
Views: 461

Re: Z900 A4 fuel leak any ideas please?

I suspect that where you straightened the float it is no longer sticking ng/catching on the bowl/gasket. However where you have double washer Ed the needle valve seat you have effectivelly dropped the seat inlet hole lower so the floats now can't drop low enough to oped the fuel inlet fully. Once a ...
Author: warren3200gt
Tue Mar 26, 2024 1:18 pm
Forum: Show us Yours
Topic: Z1A ready for the road
Replies: 14
Views: 470

Re: Z1A ready for the road

Hope it was more Millyard than Cole hands on Nigel. :lol: :lol:
Author: warren3200gt
Tue Mar 26, 2024 12:31 pm
Forum: Bike Help
Topic: Z900 A4 fuel leak any ideas please?
Replies: 34
Views: 461

Re: Z900 A4 fuel leak any ideas please?

Using fuel instead of water will tell you more Graham. If there is a crack in the overflow it'll be full of fuel. Fuel and water don't mix so the fuel would effectively be a barrier to any leaking water. As the overflow tube sits higher than the bowl surface you could try putting your finger over th...
Author: warren3200gt
Mon Mar 25, 2024 9:07 pm
Forum: Bike Help
Topic: Z900 A4 fuel leak any ideas please?
Replies: 34
Views: 461

Re: Z900 A4 fuel leak any ideas please?

If the overflow tube is cracked split it can be replaced but it's easier to sleeve it on the outside with some bass tube then solder it in place. If you've got an radio control model shop near you they are a treasure trove for little odds and sods like brass tube, piano wire to make springs, small t...
Author: warren3200gt
Mon Mar 25, 2024 8:00 pm
Forum: Bike Help
Topic: Z900 A4 fuel leak any ideas please?
Replies: 34
Views: 461

Re: Z900 A4 fuel leak any ideas please?

Another thought. With the bowl off fill it with fuel and see if level drops. If it does then the overflow tube has a crack.
Which means when the level drops from dumping fuel from the crack, it refills and then repeats again etc etc.
Author: warren3200gt
Mon Mar 25, 2024 7:57 pm
Forum: Bike Help
Topic: Z900 A4 fuel leak any ideas please?
Replies: 34
Views: 461

Re: Z900 A4 fuel leak any ideas please?

Sounds like the float is sticking on the bowl side. When bowl off works fine, when bowl on overflows. Can only be a clearance issue between bowl and float.
Author: warren3200gt
Wed Mar 20, 2024 1:18 pm
Forum: Bike Help
Topic: Alloy wheel Identification CMA’s maybe?
Replies: 17
Views: 403

Re: Alloy wheel Identification CMA’s maybe?

Thanks Gents, one of those bikes that gets played with every close season. It's never quite the same 2 years running. Sometimes for the better, sometimes for the worse so gets swopped back immediately :lol:
Author: warren3200gt
Wed Mar 20, 2024 12:06 pm
Forum: Bike Help
Topic: Alloy wheel Identification CMA’s maybe?
Replies: 17
Views: 403

Re: Alloy wheel Identification CMA’s maybe?

Hi Warren, for such rare / seldom seen for sale items it's a case of how much someones prepared to pay / how badly they want them ! Especially for an early Zed - there'll probably never be another set come up for sale ! ...... Just watch this Forum ~ "For Sale" section in the next couple ...
Author: warren3200gt
Wed Mar 20, 2024 10:35 am
Forum: Bike Help
Topic: Alloy wheel Identification CMA’s maybe?
Replies: 17
Views: 403

Re: Alloy wheel Identification CMA’s maybe?

Thanks again. Hopefully then, I should get my money back as I brought some other bits including a set of complete Z1R wheels and an old Z Kerker Exhaust which needs some welding, stripping and paint. Roughly, What would you think they are worth on there own complete as a guide? Cheers I sold a proj...
Author: warren3200gt
Sun Mar 10, 2024 8:43 pm
Forum: Bike Help
Topic: Z900 A4 Starting( or not) for 1st time after full restoration
Replies: 12
Views: 501

Re: Z900 A4 Starting( or not) for 1st time after full restoration

gray wrote:So 2 adjacent carbs are dry , both fed by the same pipe from the tap. But when the tap is turned on, with both pipes disconnected, fuel flows from both outlets. Suggests a blocked feed pipe to me.

Or T or vent.

Go to advanced search