Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Search found 26 matches
- Mon Jul 30, 2018 4:51 pm
- Forum: Bike Help
- Topic: wiring problems
- Replies: 22
- Views: 7316
Re: wiring problems
I've put it on my trailer and taken it to a local bike shop, they will now sort the wiring. Thanks for all of your help and advice.
- Tue Jul 24, 2018 12:07 pm
- Forum: Bike Help
- Topic: wiring problems
- Replies: 22
- Views: 7316
Re: wiring problems
Yellow and black also black both connected to the same colours.
- Mon Jul 23, 2018 6:01 pm
- Forum: Bike Help
- Topic: wiring problems
- Replies: 22
- Views: 7316
Re: wiring problems
I connected the black under the tank to the live and the engine turns over, then I dropped the end of the wire that I had put on the battery, it went to earth and the engine turned over. I'm very confused.
- Mon Jul 23, 2018 2:49 pm
- Forum: Bike Help
- Topic: wiring problems
- Replies: 22
- Views: 7316
Re: wiring problems
The engine turns over.
- Mon Jul 23, 2018 10:20 am
- Forum: Bike Help
- Topic: wiring problems
- Replies: 22
- Views: 7316
Re: wiring problems
what type of switches do you have? the a1 switch wiring runs through the handlebars & has single bullet connectors if you have this type the black wire from the r/h switch connects to one of the wires in the clutch switch the other black wire from the clutch switch connects to the black wire co...
- Sat Jul 21, 2018 5:04 pm
- Forum: Bike Help
- Topic: wiring problems
- Replies: 22
- Views: 7316
Re: wiring problems
you need to check the kill switch. the brown wire should be live when the ignition is switched on & the yellow/red is live when the kill switch is in the on/run position Iv'e checked the above and both are correct. I have also checked the black from the starter button and when I press it I only...
- Tue Jul 17, 2018 4:23 pm
- Forum: Bike Help
- Topic: wiring problems
- Replies: 22
- Views: 7316
Re: wiring problems
I checked for continuity between the back from the starter button and the red and yellow, expecting there to be none until the button was pressed, there was continuity all of the time until the kill switch was put into the stop position, then I only had continuity when the button was pressed. I thin...
- Tue Jul 17, 2018 3:39 pm
- Forum: Bike Help
- Topic: wiring problems
- Replies: 22
- Views: 7316
Re: wiring problems
red and yellow has power and there is only one black in loom.
- Tue Jul 17, 2018 1:53 pm
- Forum: Bike Help
- Topic: wiring problems
- Replies: 22
- Views: 7316
Re: wiring problems
I've found an old switch from another bike, the black from the horn side has a double female connector, so I put the black from the starter side and the black from the loom, (stick with me) the temporary switch had a brown and a green Male, I connected them to the spare brown and yellow/black female...
- Tue Jul 17, 2018 10:14 am
- Forum: Bike Help
- Topic: wiring problems
- Replies: 22
- Views: 7316
Re: wiring problems
I have no clutch switch, so I have now ordered one. Sometimes things are staring you in the face. Thanks for the help I'm sure that will be it.
- Mon Jul 16, 2018 1:18 pm
- Forum: Bike Help
- Topic: wiring problems
- Replies: 22
- Views: 7316
wiring problems
I'm restoring a Z1000 A1 and have put a new wiring loom in that I got from Z power. I can't get it to turn over with the starter button, I have connected the starter solenoid directly to the battery and it turns over but no spark, Are there any common idiosyncrasies with these replacement looms? (ap...
- Tue Sep 05, 2017 2:08 pm
- Forum: Wanted Adz
- Topic: Z1000 A1 calipers
- Replies: 4
- Views: 2111
Re: Z1000 A1 calipers
I have called them, two calipers on there way. Thank you very much for your help.
- Tue Sep 05, 2017 1:59 pm
- Forum: Wanted Adz
- Topic: Z1000 A1 calipers
- Replies: 4
- Views: 2111
Re: Z1000 A1 calipers
Do they have a set or are you suggesting they can re-weld them?
- Tue Sep 05, 2017 11:59 am
- Forum: Bike Help
- Topic: 1978 Z1000a1 Wiring Harness Routing
- Replies: 18
- Views: 10508
Re: 1978 Z1000a1 Wiring Harness Routing
I know its no help but I'm in the same boat, my one didn't even have a loom when I got it. All I have been doing is looking at any pictures I can find in workshop manuals and the like.
- Tue Sep 05, 2017 10:24 am
- Forum: Wanted Adz
- Topic: Z1000 A1 calipers
- Replies: 4
- Views: 2111
Z1000 A1 calipers
I have received my calipers back from the aqua blasting and found some small and large cracks, so I need a pair of calipers for a Z1000 A1. Can anyone help please.