Hi, poor explanations on my account. Hopefully I can either get another shaft or swap the two offending gears over.
Rob

Hi, it looks like the shafts aren't interchangeable as a complete unit. All the part numbers match on each shaft apart from 3rd and top. Having measured the teeth, the 1100r has wider gear teeth, probably to improve durability.
Rob

Many thanks. Makes the job easier.
Rob

Hi all, due to a snapped front sprocket bolt on my Lawson (J engine), I am going to have to replace the output shaft. I have a unitack\z1100r output shaft with the nut retaining the front sprocket. Are they interchangeable?
Rob

Yep, very good piece of kit. Only replacing it as I have been offered a full kerker system.
Rob

9

Black ceramic coated delkevic system for gpz1100/j series.
Downpipes only done a few hundred miles, silencer(kerker style), never fitted.
£300 plus postage
Rob
Photos once I have removed it from the bike

Can be repaired, there are a few places that do it. Just do a search on here.
Rob

B1 is electronic and b2 is cable driven
Rob

Yes please. I will send you my address.
Cheers Rob

Hi, loctite 242 blue is what I generally use, have used red in the past for various applications but that is regarded as more permanent. The bolt snapped coming out of the chicane going into the left hand bend near the mountain at Cadwell. Very lucky by all accounts that it did cause any damage or l...

I use the tab washer system on my b1, and never had any problems, you can reuse it a few times, if you are careful removing it. On my Lawson and Endurance bike, as they have offset sprocket, I just use loctite and torque them to factory spec. Never had a problem with them either and they both have h...

I have used them in the past and was impressed, wanted to get some parts without the hassle of customs etc.
Rob

Thanks