https://imgur.com/u8OUXKw https://imgur.com/QMVOnAR Evening all, After 7 years it is getting time to move on my big SUZI. Completely original and very mint condition all over. Only 6100 miles covered and current MOT. Best colours and the standard factory end can is included in sale (Yoshi can fitte...

How do the new exhausts sound?

Can they be compared to original sound produced?

Just curious.

I like the bike very much. Well done. Has anyone mentioned that the reg. plate is hanging a bit low - and the tail light is pointing down a little too much?? I think this may be because you have the shorty rear fender from USA spec - combined with a stop lamp bracket from a different spec bike - pos...

Hi There and welcome.
I did up one of those bikes a while back.
There is a photo story here and the pics enlarge if you click them - http://www.zedrider.co.uk/z-650-b.html
You can get factory manuals and some other stuff from my website if needed.

From Mark

Mark, If you can shift your bike first mine is a better buy than the £8.5k one I reckon. https://www.carandclassic.co.uk/car/C1216746 Got loads of pics and vids from the rebuild. And it is the first year of production with the met paint and gold blingy bits. pm me if you want to take it any further....

Well Done,
this has been a labour of love for you.
glad to have had some small input into the process.
Now go out & enjoy !!
From Mark

If your silencers are beyond repair you can split the system and fit these repros.

https://www.ebay.co.uk/itm/233232327399

There are pics of them on Z650 & Z1000 in the ad.
I have them in stock now if you want to give me a pm.
Cheers

Mark T

My way is to warm the can a little. Gets the spray out at higher temp and reduces runs etc. To do it I get a plastic bag round the can and then part immerse in a jug of boiled water whilst still hot. Don't leave it in too long or will get to hot to hold and be accurate. Cheaper & quicker than ge...

if you can get the part off the bike so the raised letters are flat it helps the paint to go where it should. I used some heat resistant black paint and blobbed it in with a pointed wooden stick ( like a BBQ skewer). You can push the paint around with the point to get it in the corners and it levels...

Hi Rattly,
I am Cotswolds near Cirencester.
Will drop you a pm for address to take a look.
Cheers from Mark
tel O seven nine 8 one 2 4 7 4 7 four if you can text me.
From Mark

hi there
few carb & airbox photos here which will enlarge if you click them.

http://www.zedrider.co.uk/carbs--airbox.html

** note this is a B2 machine so there may be minor variations **

look for traces behind badges/ grommets/ rubbers or inside/ underneath tank & panels or fuel filler cap/ catches.
a lot of painters wont get right in around those and there may be some original bits to spot somewhere.
Such as where front tank to frame mounting rubbers go or threads above fuel tap.

Steve,
trying to send u a pm ref. this but it is stuck in my outbox for some reason.
can u txt me ur email to 07981 247 474 so we can discuss please?
Cheers
Mark

Hi there,
could you give me a part number and say which colour of caliper it is please?

Ian,
you got an email from me to check out tonight when you get a minute.
cheers