I think you asked me a while back about restoring your switches, so if you still have them? Open up the head light, disconnect the replica ones, and plug in the old ones, ( if they worked before the rebuild ) and see if the problem is fixed.. If those new switches was the problem, You can send to me...

Sounds like a, Thrust bearing.. It's the bearing that separates the clutch, when you press the clutch in.. So when you push the clutch pedal in it dissingages the Thrust bearing, so goes silent... So sorry to say.. A gearbox out, and change it.. And while your there, might as well change the clutch,...

jimmock wrote:What a stonker of a Zed 900.

Thanks.. But she's sick..

Nice paint on the tank Zed man is it OE or re painted ? It was a repaint at some stage ( before I got it ) but It was full of filler, and had a liner in, that was peeling off. I found out one day when I got it our of the garage, and looking good in the sun, then noticed a lump on the tank, it was a...

When I got my A4, it had reflectors underneath the tank, but they had lost there sparkle, and not orange anymore, so time for a freshen up.. I put some gt750 reflectors on, as they have a chrome effect edge, and I had them anyway.. But the big question is.. To reflect or not reflect?.. kawasaki/ gt ...

Just seen this on youtube, thought I'd share..... Nice bike too....

http://youtu.be/AjRrfNhMyxU

Might try, as Johnny's cash said.....one piece at a time... Buy why do you need one?

December week 1.5 update. The oil cooler that came with the bike was a bit damaged, after bending the pipework straight I made a start on the fins. http://i241.photobucket.com/albums/ff247/vulpip07/Z900A4_041214_1.jpg http://i241.photobucket.com/albums/ff247/vulpip07/Z900A4_041214_2.jpg Using a lar...

I use a hot air gun, on most old faded plastic parts. But don't get too close, and mind the paint work if working close to painted body work.. most new cars have plastic bumpers, and some not painted. I have seen lots of unpainted bumpers, with the corner pushed in, and with a little time and know h...

1 gallon per mile... But a bit like the zeds.. Built to last... Nothing now, is made to last 40/100 years anymore... unless you rebuild a zed.....

November week 2.5 update I collected the cylinder block from the machine shop, the new liner is difficult to tell appart from the others. To recap the liner was from webike, the machine shop said it was a repair liner, 1mm oversize in almost every way, bore measured 65mm. http://i241.photobucket.co...

Here you go matey... There's one down the list for £22.00 +6 p&p

http://www.ebay.co.uk/sch/i.html?_from= ... r&_sacat=0

If you drill a small hole at the end of crack, it will stop it growing any longer.. the crack that is....

This was a move up from my push bike at 16 ( believe it or not ) loved it.. But carnt remember what happened to it? Don't tell anyone..

About two years later than I'd planned, finally wheeled this out of the garage and got her fired up - thanks for the help tlc. Got it from Rick Brett three and a half years ago and ended up taking it completely apart. Resprayed in gold as I was fed up looking at blue ones! Main worry on start up wa...