how the hell do you fit a new one??? seems too tight

i have sent the v5 off to the dvla which if i remember said it had 1 colour change to red, i have the old style v5 which states its red/gold so dont know if the "change" was having the gold removed.the bike is currently what i would call brown, if i remember correctly pj, you said the pain...

not ready for a long time yet(next autumn prob) but any recomendations for repainting my z1000, as local as pos but if the right job means posting then so be it, the bike is a 1977, what are the correct paint set for the bkie and model ?

it lives turns out it was the connection under the tank from the clutch switch....thanks for the help guys, i'm sure you would have got there eventually

solenoid is ok......got an autoelec coming thurs so watch this space

looked at the bullet plugs and cannot seem to get power to them with the button pressed byputting multimet into each in turn and also back to batt term, tried jump from the car but still nothing. as the sol is of i will take it to work and get a spark to have a look and confirm one way or another

ignition on or off, button pressed or not the only power i can find is on the main red terminal on the solenoid

think i need to get someone to look at it. button is ok power to it and from it when button pressed, dont really know what i am doing

decided to go with an exhaus craft piper style..

Wayno Following on from Pasc,check you have continuity through the coil by testing across the 2 soldered terminals on the solenoid with a multimeter set on ohms you should get between 3 and 4 ohms. Regards Steve yes steve i get 3.6 ohms. if a screwdriver across the 2 main terminals then the motor t...

is there a way to pinpoint if its a switch or motor fault? battery ok and no "click" from the solonoid?

is there a way to pinpoint if its a switch or motor fault? battery ok and no "click" from the solonoid?

has anyone got/seen this pipe on a bike or know of anything else ?

http://www.predatorexhaust.co.uk/unitra ... CHROME/907

where can i find model identification from frame/engine numbers?

unfortunately i dont know of anyone available midweek