It better work, bought 6 tubes from Boots.
The cashier gave me a right funny look
I think that she understood when i explaind that i just wanted to clean my back end up a bit

Dont know if relevent but i fitted the the snorkel part of the air box as I finaly managed to get hold one off eBay.
Started first press and on all 4 cylinders
Had to adjusted tickover and now seems to run better.

Good shout Mr Pigford,
Changed the large breather O Ring, no more oil on the top of the gearbox
Just a slight weep on the alternater wire grommet now

PASS ME THE AUTOSOL

Thanks for the advice
Will give them a call

Could anyone recommend someone that could blast, remove a couple of shallow dents and then re-chrome a UK rear mudguard ?
Cheers

Forgot to say -
Only require good condition as will re-chrome.

Has anyone removed an headlight rim Stanley 001-0877 that is no longer required.
I would like to keep the original UK Headlight but the rim has deep grazing to one side.
Beer money waiting. (rim only)
Thanks

Please could anyone advise best way to remove the badges from the side panels of a Z1a with least risk of damage to both.
Thanks

Hello, I am missing the welded bracket that holds the steering damper onto the Z1a frame. :( This is the same bracket that went on to be used on both sides of the Z900 & Z1000a1 / a2 to hold the reflectors. I could make similar unless anyone as any idea where I can get one from ?? Ideas thanks :...

Ordered

Just spent a couple of hours in my garage fitting the swinging arm. Removed the box section one and fitted the swinging arm that I got with the bike, all went well.. Suddenly OMG :x :( :cry: The wheel axle does not fit into the swinging arm slots :!: :!: :lol: Well you have too :lol: Axle 20mm, slot...

Ok thanks,

Ill fit it up and see how it goes

Just had a quick look. The swinging arm has a needle bearing each side with a sleeve that is held between the two bearings. There is then an inner sleeve that runs the full width of the swinging arm inside the bearings. So I guess in this guise the grease could not go anywhere even if there was a gr...

Great, you can count me in