Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Search found 1882 matches
- Wed Apr 10, 2024 8:28 am
- Forum: Wanted Adz
- Topic: Z900 A4 or Z1 or even Z1000 plastic document tray (Now Sorted)
- Replies: 40
- Views: 1142
Re: Z900 A4 or Z1 or even Z1000 plastic document tray
Z1 - Z1B shaped to fit the oval tail light. Z900A4-5 shaped to fit the more rectangular tail light which was also used on the Z650 and Z1000
- Thu Apr 04, 2024 7:14 pm
- Forum: Bike Help
- Topic: Z1000st coil connections + -
- Replies: 5
- Views: 225
Re: Z1000st coil connections + -
Doesn't matter which to which.
- Thu Apr 04, 2024 2:57 pm
- Forum: Bike Help
- Topic: ZRX forks pre-load adjustment
- Replies: 7
- Views: 321
Re: ZRX forks pre-load adjustment
Doesn't raise anything. Just preloads the forks so that they don't dive until the preset load is exceeded in my experience.
I put about an inch of pre load in my 650's and 900 & 1000.
I do like a stiffer front end and hate the fork dive of soft forks when braking.
I put about an inch of pre load in my 650's and 900 & 1000.
I do like a stiffer front end and hate the fork dive of soft forks when braking.
- Thu Apr 04, 2024 12:39 pm
- Forum: The Bottom Shed
- Topic: Zrx
- Replies: 4
- Views: 282
Re: Zrx
Looks like emissions plate so probably go a hole under the 10p to block it off ?
- Tue Apr 02, 2024 5:43 pm
- Forum: Wanted Adz
- Topic: Z900 A4 or Z1 or even Z1000 plastic document tray (Now Sorted)
- Replies: 40
- Views: 1142
- Tue Apr 02, 2024 5:30 pm
- Forum: Bike Help
- Topic: Front brake problem
- Replies: 16
- Views: 441
Re: Front brake problem
moizeau wrote:What a difference a hole makes.
Yep, difference between being in the pink or in the shit
- Tue Apr 02, 2024 5:22 pm
- Forum: Wanted Adz
- Topic: Z900 A4 or Z1 or even Z1000 plastic document tray (Now Sorted)
- Replies: 40
- Views: 1142
Re: Z900 A4 or Z1 or even Z1000 plastic document tray
There you go Graham. Reputable member / seller.
https://www.facebook.com/groups/z1owner ... 263828370/
https://www.facebook.com/groups/z1owner ... 263828370/
- Mon Apr 01, 2024 9:11 pm
- Forum: Wanted Adz
- Topic: Z1000R2 side stand stopper
- Replies: 21
- Views: 778
Re: Z1000R2 side stand stopper
Ah OK, my J2 side stand uses the same mount bracket along with a seperate sprung loaded plate to operate the stand kill switch. It's quite a clever set up. The bike will start on side stand but unless the override switch is depressed as you lift the bike upright the stand will spring back about 15 d...
- Mon Apr 01, 2024 5:42 pm
- Forum: Wanted Adz
- Topic: Z1000R2 side stand stopper
- Replies: 21
- Views: 778
Re: Z1000R2 side stand stopper
Have you guys got this side stand override kill switch on your bikes? Red one next to the hi lo
- Mon Apr 01, 2024 2:41 pm
- Forum: Bike Help
- Topic: Front brake problem
- Replies: 16
- Views: 441
Re: Front brake problem
If you zoom right close on your picture there is a different coloured area central on the LH hole. Looks like it's rusted up. Get probing!
- Mon Apr 01, 2024 2:33 pm
- Forum: Bike Help
- Topic: Front brake problem
- Replies: 16
- Views: 441
Re: Front brake problem
Pull a bristle from a wire brush and have a probe to ensure the holes in the mc are clear. You obviously need to be able to relief back into the mc or the brakes would stick on.
Where did you see the stream of micro bubbles coming from?
Where did you see the stream of micro bubbles coming from?
- Mon Apr 01, 2024 2:16 pm
- Forum: Bike Help
- Topic: Front brake problem
- Replies: 16
- Views: 441
Re: Front brake problem
It's obviously working as it should or you wouldn't have had the small stream of bubbles appearing in the mc. There is obviously still air in the system. Make sure everything is tight so there's no chance of air binging sucked in on lever return the reverse bleed them using a serynge slowly to allow...
- Mon Apr 01, 2024 11:10 am
- Forum: Bike Help
- Topic: backfiring
- Replies: 19
- Views: 832
Re: backfiring
Possibly sticky fly weights on the advancer? Maybe?
- Mon Apr 01, 2024 1:09 am
- Forum: Wanted Adz
- Topic: Z1000R2 side stand stopper
- Replies: 21
- Views: 778
Re: Z1000R2 side stand stopper
Same set up on my J2. There's also a plate that controls the side stand override switch. With the bike on the side stand you can start the engine, if you lift the bike upright the side stand springs back a bout 15 deg and the side stand switch kills the engine unless your pressing the override switc...
- Sun Mar 31, 2024 3:35 pm
- Forum: Bike Help
- Topic: Z900 A4 fuel leak any ideas please?
- Replies: 147
- Views: 4719
Re: Z900 A4 fuel leak any ideas please?
Getting there. Think your next start attempt will prove more successful. Correct jets, needles, float heights, fuel level, plunger seals, airscrews 1.5 out and things should be different from last time! Just ensure no carb to head rubber leaks.