Hi .I have a selection of cam caps here , maybe a dozen or so
Im not far away if I can help

mine fitted perfectly 1st time and has been great ....I also have 4 pipes

Bandit engine looks at home in there

i welded a small piece of tube to a threaded bar then squished it a little in the vice until it fitted over and held it lightly .... worked a treat

Would I be right in saying thats a 4 bolt front wheel , you may be better off sourcing a complete wheel in decent condition as you will need the hub and discs as well ........and I would probably put the correct forks in just to get the right period look , does it have the earlier clocks and yokes ?...

Does anyone have a fork leg for sale please
I need the damper rod and the spring loaded valve which fits inside the fork tube if possible

Just noticed there is a sealing ring missing on the damper , hope thats available

Hi ..i am rebuilding a set of forks that came in pieces and want to make sure I have them in the correct arrangement Looking at the pic do I have all the parts in the correct order ? Also the bush at the bottom looks like it can go on both ways ( there is a lip at one end ) which is correct ? Thanks...

Hi will these space to suit a gpz900 ?

I had the same problem ...... loosened of the clamps on the bottom of the forks and gave it all a jiggle and it fell into place Cheers Chris, problem solved. Some head scratching and a senior moment, losened fork bottoms and they sprung inwards ever so slightly to fit flush with spindle ends. Exact...

I had the same problem ...... loosened of the clamps on the bottom of the forks and gave it all a jiggle and it fell into place

chrisNI wrote:

Pigford wrote:

gpjes wrote:

chrisw1 wrote:Brilliant bikes .....here is mine for some some inspiration

Is this Andy Whitley & his kwack 1100R in this pic?

Don't look like Andy - He's got a Z1R he sprints, but haven't heard from him in a while?

Andy WHITTLE Z1-R...

Thats my Z1000r2 in the pic .......and my mate Ken

Hi ,,,, I have the chance to buy the C5 ignition system for my Z1B which is fitted with a DYNA At $300 it seems pricey compared to a DYNA but the kit comes with coils so thats ok I assume I second hand as on their website the big Zed setup is $479 and with the pound being what it is that’s a good b...

Hi ,,,, I have the chance to buy the C5 ignition system for my Z1B which is fitted with a DYNA At $300 it seems pricey compared to a DYNA but the kit comes with coils so thats ok I asked them what the advantages of the C5 are over the Dyna and this is the reply " C5 uses optical trigger with 18...

Just a thought ..... have they used the correct valve spring retainers for the shim under bucket ?
I believe they are different to the shim over bucket ones and maybe that broke the shims
I will stand corrected if that is not the case that they are different