All went well. Restom chap I emailled for confirmation on how to use it was superb. After sales 2nd to none. The tank was 5 litres brimmed which was right on the edge of 2 kits, 2 to 5l and 5 to 15l. I was advised to get the larger kit due to it being porous. It came with 2 bottle of degreaser. I us...

This is a link from within the link that that Stugill posted
https://www.motorcyclespecs.co.za/roadt ... cling.html

Thanks Rob, I'd forgotten the gravel wash prior to sealing.

Not a Z, it's a TY250 so please move if required. My daughter's coming over and wants to have a play but the tank had a leak last time out. The tank rattled and fibreglass fell out. There were some bubbles in the gel coat.... IMG_20230727_161455_3.jpg IMG_20230727_161514_0.jpg IMG_20230727_161533_4....

Another thing that can cause an inconsistant fuel level could be the float pin binding. Crap build up on the pin or in it's mounting holes on the legs of a deformed leg.

Ended up ordering an aftermarket one, will take a week to get here apparently. Kawasaki France's website doesn't show parts for older bikes, it directs you to a concessionaire, all of which are multi-marque and carry very little stock and require an email or phone call to see if / when they can get ...

Thanks, just wondered about compatibility as it would get to me quicker.

Just bust the clutch cable on the ST. There's a bloke selling a genuine cable online NOS. ref 54011-070 which is from a D1 according to CMSNL. The ST ref is 54011-1019.
Does anyone know if the Z1R cable would fit my ST please?
Cheers

To test the solenoid remove the solenoid to starter lead and make sure you have full battery voltage going to the solenoid input terminal. If good, hit the start button and see if you've got the same voltage leaving the solenoid. You said it was clicking so the earth should be OK but worth confirmin...

Great job Philippe, the H will only take you another week now that you can fully concentrate on her

This spacer fits on the inside of the sprocket carrier Yep, holds the bearing in place, I found out I'd missed it on my Zeph many years ago, following a polishing mop session, on the way to France. Ended up superglueing the bearing in at Mont Saint Michel due the the rear wheel sitting at an obscur...

Just cleaning this up and there has been some damage. The small hole looks factory made but is it? The larger damage definitely needs a repair but was there a small hole there originally or are one or both 'modification'?

Cheers

Thanks Philippe, I'll have a closer look. It seems they do supply to France but their online purchase page doesn't seem to be working at the moment. If it turns out they don't, no problem, I have Belgian friends who come here often.
Cheers

Thanks for the confirmation Philippe. I've found one on LBC at a good price so I should be good, just waiting to see how much the FDP will be? I'm sure I'll be asking you if there are some other bits you have before long.
Cheers

I've sprayed a few small frame parts with Simoniz Tough Satin Black but would like to spray the frame with a spray gun. I've contacted Holts and asked them if they have a RAL code for the paint and they've replied saying it is not RAL matched and suggested I do a sample with the spray gun and have a...