Hi I have measured the holes ,the one on the left is 9mm at the front stepped to 12mm at the back . The holes in the one on the right are 8mm all the way through - i can`t tell if they`ve been drilled out or not. They were both on the same exhaust system that i got off Ebay about 10-15 years ago , S...

Hi

Are any of these the right thing ?

I think i got them on an old Devil exhaust i got years ago, but haven`t a clue what they`re off .

I only just noticed they are different ! ( can anyone id what they are please)

Regards
Mick

Hi Rob

I was after one for a few months ago for my B2.

i`ve put it on th bike this week and it`s spot on (genuine part so it should be).

Stangely the B2 one is almost twice the price of the B1 loom ! .

Regards
Mick

Hi Rob

If you want to splash out on a new one , they are a discontinued part (26001-1355 )

But CMSNL have ONE left in stock !.

117.50euro plus tax -- works out at about £135 all in posted to UK .

Regards
Mick

Hello everyone Just got round to rebuilding my z1000j carbs with the Keyster kits i got ages ago. Started to change the float valves but they are different , The old ones have `domed tea strainer style` filters underneath , the new ones have just a flat mesh filter . Are these ok ? Any advice gratef...

Hi Rob CMS Holland (cmsnl.com) have one for sale on their site. They have just one left for a B1 , and one for a B2! For some reason the B1 harness is vastly cheaper than the B2 ( 117eu as against 206eu ). Thats a bit annoying for me since i`ve just bought a B2 one from them --(Xmas pressie from mis...

Thanks Bill

Much appreciated !

Mick

Hello Bill

Could i have the other one please if its still available .

Cheers
Mick

Glad its got there ok !

Mick

No worries !

Its all packed up ready , i`ll post it when i can get to post office at weekend .

Cheers
Mick

F.o.c mate !
I`m not going to use it .
Pm me the address and i`ll stick it in the post.
Mick

download/file.php?mode=view&id=11450

download/file.php?mode=view&id=11451

The lights clip in with the three spring loops , light adjust via the wing nuts at the back.
Regards
Mick

Is this what you`re after ?
This is from a B2 , but i would think its the same .
Mick

download/file.php?mode=view&id=11446

Hi Scott I think i`ve got an old one of these fairings in the loft , I`ll try and dig it out when later . As far as i remember the light units clip into a black plastic mounting ring and the adjusting screws then mount to the fairing . I`l have a look to see if i still have it and take some pics. Mick

Hi Scott

As AL says the grab rail mounting bolt on the left side passes through the seat catch/ helmet lock .

Mick