nice to meet you on Sunday Al

really hope the Crank was worth the drive over for it

thanks to one of the board members I am following a lead up for a frame, I will keep you posted as if this comes off my frame will be available

I bet I have a set of unitrack cams in the back of the shed was digging around in there on sunday pulling out a Crank for Al's 1000J build if only I new I could of looked I am away till the 20th so no chance before then let me know if you want me to go digging and what sort of incentive you have in ...

warren3200gt give it a go and see and lets us know I will do the same on a bike with carbs this year is the first time ever that I have drained carbs and tanks on a few bikes just to see if its better also been disconcerting battery's another first for me but have not touched the gel ones as someone...

So are we saying there is no need to drain the carbs for winter lay up if we use ethanol free fuels? (which I always do). I think it all depends on how long the ethanol will evaporate a lot quicker and which leaves varnishing in the carb I would say you will be OK up to 6 months with out even needi...

mmmmm


new data may be

http://armchairbiker.com/ethanol-in-pet ... d-to-know/

from a petrochemical engineer friend at Castrol labs just out side Reading

thanks to Philppe's vast Knowledge the Tank I have has 142mm badge screws holes making it big Badge model, still under tank seams looking at the tail unit it does appear to be the same as a Z1000a1 but not been a 900 exspert i dont know side pannels are made in the USA with a part number of 36001-05...

hi harty, what's the tail~piece like? how much too please? thanks mark.any photos at all? 07510529545 or markjordan069@gmail.com ta think the side pannels are z1000 a1 not z900 really not sure about the tail unit just about to have a look at it up against a z1000a1 unit i have if i could work out h...

Just a thought to put in the pot If you fill your Tank with UK super 98 Plus (Shell) (is the best)) there is no ethanol in it which seems by all accounts to be bad for all things "engine" I started this practice a very long time ago 15 odd years and I have almost never had any problems, ye...

hi Jim Did it sell

only just seen this

what year ?

I have a none locking fuel cap tank with side panels and tail unit

I think this a z900 tank that is as it came off my wrong body work Z1R

hi can I ask are you going to be doing a special out of the frame ? the reason I ask is I have a Z1R and it had the z1000a1 body work put on in by some one back in the 90's and they cut the back 6 inches of the frame and mulled the seat mounts I am thinking it may be better to re frame it, this woul...

I have one its been in the shed for many years like 25 plus, not in cases just in a oily rag with pistons and rods

I was in a bike braker in Germany the other week looking for GPZ750 turbo bits there were a good few boxes of Unitrac 1100 bits lots of brake stuff all would need refurbing, there was a gear changer or two as well happy to give you there details on a PM if it helps