They push out and push back in.

Welcome Panda, nice ltd that looks nothing like a ltd just like mine, i would like to know what handlebars you have on there as i would like a slightly lower set than the Z1 bars i have on mine.

A little side play is completely normal.

My own 26mm pumpers are all left handed, so it's best to check.

You may need to use larger pilot jets, are you using 28 or 26mm carbs, if 26mm you could open the fuel screws a bit, also are your float levels correct.

Z11 wrote:Am i right? Is the Z1000 engine to powerful for the Z900 frame.

No the 1000 engine is not too powerful for the 900 frame, it may be too powerful for some particular riders though.

Its pingel or Golan for reliability, cheap doesn't do the job, grumpy1260 at downham market or suzuki performance spares at wisbech are your best bet, I got my pingel from suzuki performance spares, like you say expensive but quality.

That's a first for me.

That's probably caused by contamination during build up proccess, got some old ones that have different colour spots where its happened, never had running problems though.

Cut off should be around 2005 as isn't this when they stopped making the police version?

Hobbo wrote:Hi

I see yours is a lawson will this fit standard z1000 a1/2

Phil

Different part numbers to the earlier models.

Plus 1 on the get rid of the Weird George mod, check charging system also.

When you buy these things you sometimes end up with some crap to deal with,you done the right thing an you checked things out, and got a good result.

If you have a lathe it should be easy enough.

Looks like they have spent a lot of time with water on them, but if they are stock it would probably be cheaper to pick up second hand ones.