That would be very much appreciated.

Afternoon everyone, does anyone have an inner wheel spacer sprocket side for a Z1R. The one I have is 32 mm overall length and the one I need, I think should be about 40 mm length. Thanks. Sean.

These work well.
https://www.bikerstoolbox.co.uk/acatalo ... stons.html

All sorted already, thanks to 8 Valve Mark. Cheers mate.

Does anyone have a couple of these screw on collars for an ignition coil, the ones that hold the H/T leads in. TIA. Sean.

SOLD

Brand new in the box set of carb rubbers. £20 plus postage.

Stinkfinger wrote:Hi I've got a good Z1B kick start if its the same
Regards
Stinky

If Tim.25 has found one, I am interested in this one.

Hi Kev, I have these if they are any use, they have the US emissions stuff on the bottom, connecting the bowls. Yours if you want them. Sean.

Warren, thanks very much mate I appreciate your efforts, but they are what I already have. Yellow I will send you a pm. Thanks guys. Sean.

Thanks Warren, not sure about that, I may end up with the same problem I have got now. The rear disc is too small, and about 15 mm of the pads are not touching the disc. I have got an A1 rear disc but that won’t fit the wheel. If yours will work I’m interested, perhaps someone can enlighten us. I kn...

Anyone got an 18 inch rear alloy wheel for an A1/A2, they would like to get rid of, or a pair if you don’t want to separate. Beer tokens await. Thanks. Sean.

You will also need a new tail piece, they are also a different shape.Good luck.

If you have got the valves out of the head, you could just lay it in the head and see if it turns then bolt the caps on and then see if it still turns.Probably an optical illusion.

Thanks Dave, its an endless chain I want so wanted to be sure, this bike has got a standard Z1000 rear wheel fitted so that explains the 33t rear. I will give you a call in the next few days . Thanks. Sean.