Hi Kz1000duncp

welcome to the club!
Very nice machine you have there!
Let the good times roll.
Greetings from Belgium.
Philippe

Hi pjc

very nice bikes! Congratulations.
Greetings from Belgium
Philippe

Hey guys this morning the body work received a glossy clear coat. I took advantage of the higher temperatures to finish the paintwork. DSCN8158.JPG DSCN8159.JPG This afternoon I started to dress the old lady... and to get her "jewels" back on. This is how she is now, in my opinion it's a s...

Hi r3sc
I understand what nostalgia can do with a man's mind...
have a look there.

https://www.bike-teile.de/index.php?sei ... ljahr=1976

good luck
GrtZ
Philippe

Hi olnmfc that looks like a very nice project to me! I think you'll be able to find the missing parts on evilbay but take care! I've seen parts being offered for a certain type of vehicle that didn't matched that vehicle. So compare before you start spending money! I can tell you that a lot of the p...

Hi Mark some pictures of the handlebar ends and dimensions DSCN8149.JPG DSCN8150.JPG the diameter of the plastic /nylon end (20,85 mm) is a bit less than the outside diameter of the handlebar itself DSCN8151.JPG the lenght of the straight end is approx. 8 mm DSCN8154.JPG I hope you can do something ...

Hi Mark

I have the old bars of my Z1000R, I'll take some pictures and give you the dimensions of the white handlebar ends .
GrtZ
Philippe

Hi guys this morning the coloured stripes were taped off, the gold paint was prepared and sprayed on the small stripes. DSCN8135.JPG DSCN8136.JPG After the paint dried a bit I decided to remove the tape and to see if the spraywork succeeded... It turned out to be good. I have to do some small correc...

Hi men as promised more news about the progress. After the base coat dried completely I could see where some more filler was needed. It was applied and left to harden. Once again sanding paper grit 400 was used to flatten it down. Afterwards I noticed that there were a few more little dents visible ...

Hi mark

lovely bikes, congratulations!
GrtZ
Philippe

Hi Yngve

welcome to the club!
Post some pictures of your bikes and the ones that are for sale please.
Greetings from Belgium
Philippe

Hi Pete

when I see the pictures of your house I realise why you have no time to work on your bikes!
You did a beautiful job, congratulations !
GrtZ
Philippe

Hi men the preparation for the paintwork started. All the paint was stripped off from the body parts . The fuel tank was degreased and derusted on the inside. I used the products from Restom. The tail piece of an ST has an indentation on each side where in some countries (US and others ) a reflector...

Hi Vendetta761

welcome to the club, from one shaft addict to another!
As soon as you have a bike show us some pictures please!
Greetings from Belgium
Philippe

Hi Pete

good find!
I hope you can get her running. In France they ask enormous prices for a Z650.
Keep us updated please.
GrtZ
Philippe