That looks like your correct Pete if u had the other laser it would show with mine I have software to 2D shadow block it like this ?



You could then set it up the front of the forks and it would show it out of true ! Looks like u need frame on jig and new lower yoke

the new usa loom has to b altered to fit euro/uk bikes u will need your old blocks of the old loom and refit both wire diagram us and uk will help !!!!!

Hi can u get access to one of these it’s a high tech laser u need one around the 2k mark for the correct features it gives u datum points and is self levelling correcting it self every second if the head stock is out front to back then it would only affect the rake ! Side to side is where u are havi...

you dont say what type of gun your using ? hand or compressed air ? then theirs the gauge of staple u used i have a few gun's hand and compressed air plus their is different guns for cfm ie i have low cfm 50 ltr and a 300 ltr high cfm its the right tools for the right job so to speak ?

rob i know john browse has some !! dont think will b cheap ?

Thanks for all your comments. Couple of questions, I guess the wheels have been painted gold by a previous owner, what was the original colour of the wheels and where can I get a new screen that matches the original shape and colour. Any replies gratefully received. Peter ya wheel should look like ...

price is correct for a z1r engine complete and running

Starter motor £300 I new things were going up but wow https://www.ebay.com/itm/275698104453?hash=item4030e33885:g:BYAAAOSw79hj8eUM&amdata=enc%3AAQAIAAAA8FpLXuM%2F7lBzDXzfi9GHRMpPnUa3%2FjkDEdWfJQgehfaMYcmZtkC%2Bhsz4Yrc66TsWPe9Z0S8RZE5XHZoSsKgIANawmTdiM0gCCdsl5KpCgmPkiYVXg6deGOa%2Bvpjh8myCVJiUHsN...

paul doran wrote:When did a Z1R engine become so valuable
I am not knocking Your engine but the price seems very high
But good luck with the sale

ive got that engine under paul turner on kawasaki z1r owners FB and its 2500 ono on there paul

steve-g wrote:The smaller hole on 650 is above the large one, on the 1000 its the other way round.

hang about the small hole above the large one is z650 ? as pete's picture ? posted ? but 1000 is below large hole aint that what he wants 1000 a1-2 ? as mine and warren's pic ?

shaggy wrote:Would like around 2250 but am open to reasonable offers

so thats the one on vjmc buy and sell

All same these 2 of a mk2 loads on eBay

over the yrs i have played with clutch lths i have a few 070 d1 cables also a z650 fits but is 20mm longer and a 1018 1000j fits but is 28mm longer a 070 dont have spring to bottom !!!

pic of 1018 1000j fitted to z1r see how it stands above clocks

RussG wrote:How do you tell if the master cylinder is the correct size? I’ve never seen them advertised by size …

never had a rex but looks like standard 5/8ths

if u deffo have no air in system and no pressure the fluid is over riding the seals if u have rebuilt check seals are put in correct way if not get a rebuild kit and start again about it really