In a previous post i mentioned that the green Dyna coils were a tight fit under the frame rails and i had to find a solution to this. There were other problems too: One of the HT leads was always trying to work itself out of the coil due to the tight bend it had to make exiting the coil and miss the...

Whilst putting a few miles on the bike i noticed that there was a gap appearing between the end cap and the can of the exhaust. The baffle is a sliding fit in the outer tube with a pressed plate welded to the inlet side and the gas pressure is forcing the baffle and hence cap, so it needs to be held...

I have a couple, one new one used although they're both ** they are very different thicknesses. PM me your address & I'll get them posted in the next day or so. Thanks for the offer GB! I have ordered the one from Spain that AL put me on to so i will try that one first and hopefully it works. I...

New one in Spain. Expensive but it is new and its the thick one so you can smooth it down if necessary!

Cheers. Don,t know why this one didn't show up on my ebay search and its the cheapest i've seen so far another one in Holland for 40 something euro and one in NZ for $70!

:oops: I hit the "post" button after you said about the cam tunnel O-ring.... since then you added the stuff about the starter washer - of which I have none, sorry :shock: OK no sweat they seem to be unobtainable. I can get a used one from ebay or similar if i buy a used alternator or sim...

I've got a few spare if needed

Wicked! Any chance you can send them off to me so i can try and get this thing working properly. Beer tokens and/or any spares i may have and you want in return of course?

My new bottom yoke fresh off the CNC mill: IMG_20171201_125924.jpg IMG_20171201_125936.jpg After some dimensional/fitting checks all ok and off to Mikey with some other parts for polish/black anodising. After my first real outing i appeared to have a huge oil leak from the cam chain tunnel, head bar...

Looks like a lot of fun ahead

My P&M has a similar head mod re. the angled head skim. Quite common on this vintage of race engine.

Its made it into the shed:



Its feckin cold out there

Feckin' beautiful

Thanks, it has Piggy parts inside

Congratulations !! :up Looks stunning , hope you get the "to do list" shorter and even finished! Let the good times roll ! :resp Cheers Philippe Cheers :beer Have made a start already, but still a lot of little jobs to do, but i will "finish" this bike soon as i have my next pro...

So after 3 1/2 years of obsessiveness here it is running, but not finished yet....





Major things to sort out are:

Paint
New front bottom yoke
Carburation

I have an A4 page full of snag list

Think I've just done a sex wee in my undies, very nice

"Sticky white love piss" - copyright League of Gentlemen

At this point things were happening very quickly and i was building the bike up quicker than i can photograph it, so apologies for the lack of photos, i will endeavor to take some more detailed shots over the next week or so. I was building the wiring loom from scratch as the old loom is a right dog...

Thanks zed1015, i'll give him a try