I do not have carbs here at the moment as i want to order a pingel fuel tap and filter but need to know the fuel line size so they are correct for when i get carbs back

thanks

hi i all ready have the head but not sure what model it is off i will take some pictures Monday see if any one can help just wanted to know what was best one ie the A1, A2 or A3 if there was any advantage as thought would get head work done on the best head i can get hold of

hi all i am doing a project on my 1170 and have read and heard of cylinder head swapping what head is going to give me the most power ? a gpz 1100 B1 or B2 or unitrak gpz 1100 A1,A2 or A3 what is the best head to go for as far as i know it is a gpz1100 motor A2 but not sure as is a Z1000 mk II i ha...

Andy, You have mentioned the two best contenders... (Imho) I would prefer Kerker, although Yoshimura for max power. I have not seen a yoshi pipe that allows removal of oil filter without dropping headers. RegardZ. where would i get a yoshimura exhaust from ? or would i have to make it up from moder...

Hi all
i am looking at changing my exhaust, what exhaust is going to give me best power gain ie kerker, Yoshimura etc

thanks

hi all
i have 1976 z900 and i am after a set of clocks

many thnks

hi all
i am after getting my forks anodised and i want the stansions nitrate coated can one give any one that gives the best service for this in uk

thanks

Rhencullen wrote:Sorry - thought you meant you were trying to put an A2 GPZ900R engine in the frame.

That is ok not a problem, thanks for trying to help

hi all at the moment i am going to be putting my gpz A2 engine in my Z9 frame Will it fit and mount ok :?: The 900R frame is very different to a Z900 - in fact, the engine is part of the frame on a 900R. It is not a 900R frame as i stated it is a Z900 1976 frame which i am putting my gpz1100 A2 eng...

Andy, I have an Z900A4 and I bought a "new" wiring loom from I think I paid about £165, earlier this year I was speaking to a guy with an early '90's Bimota with a Superlight engine, he had contacted one of these guys who advertises regularly in the bike press - he wanted £1000 to re-wi...

Do you mean the early outers on the gpz cases? If yes then! yes and no. Some will physically bolt straight on i.e ignition housing and generator cover BUT the gpz uses a different stator mount to the earlier motor so some jiggery pokery needed to get a working charging system. Also the clutch cover...

hi all
at the moment i am going to be putting my gpz A2 engine in my Z9 frame till my Z1 engine finished it will be running full dyna 2000 ignition the problem is what wiring loom do i get or can some one make me one up ?

Hi all
i am using a gpz1100A2 is it possible to use early Z900/1000 engine casings generator,timing and sprocket cover casings

Thanks

prowlerz1 wrote:i cant see any downpipes

does any one know where i may get a seat for my Z made like the one one blue bike

cheers