Anyone have an idea where l can get one these for Zed's?

It's the type that goes into the plug hole, expanded, starts on the good threads, then screws out, bingo.

Did have it saved on 'putor but she fried and now l've lost it. Thanks

Garn.............................. you must have missed matched/blow in Zorst's, l know for fact the KZ1000LTD Jardine system had the four drain plugs, knew a guy many years ago who fitted grease nipples to said plug holes and give her a dozen squirts before storage over winter. True story. Being at...

Also have a leak on the right side of the barrel, virtually below the 10mm bolt in the centre left of the head. For the life of me I cannot see where the leak originates but it is enough to give a bit of a spray back, compression is spot on, no signs of failed gasket Bout 6 years ago had my Z1B top...

Had any luck Nico? Had drama's with my Z1R Mk11, was an after market bowl gasket, poorly made, float was snagging on the gasket as it was too wide, took ages to find, might be worth a look. If no success, make your way to Mandurah and l'll have a look, 2nd set of eyes always handy, plus we can go fo...

Garn go to a good bearing supplier, common as

Output - BL305

Drive - 5305NB

3 ohms is the go with Mk11's

Give these people an email, rear listed but can't see front. http://www.ebay.com.au/itm/MetalGear-Brake-Disc-Rear-KAWASAKI-Z-1000-CSR-1981-1982-M1-M2-/150984627206?hash=item2327629406 http://www.ebay.com.au/sch/m.html?_odkw=kawasaki+1000+csr+m1+disc&_ssn=mgear2003&_osacat=0&_from=R40&...

1977 Z1000A1 doesn't have the prop bar, uses the hinges with extra stopper piece to stop flopping over onto side cover, same as Z900A4, the 1978 Z1000A2 went back to the prop bar, same bar as used on the Z1, Z1A & Z1B. They also went back to a very simular seat cover pattern as Z1, Z1A & Z1B.

Now sold and shortly be on it's way to UK. Anyone on here.

Shame it didn't stay in Oz, 1 of 33 sold in Oz, one owner Australian Compliance/Delievered.

Did you end up buying the H nico?

Still for sale l see.

Every repo one l've used leak at the white nylon barrel, probably impossible to get this part reproduced.

Just re-read G's first question, think he means regulator. All the Zeds use a battery case including tha Z/KZ900A4 A5 and LTD's. Part number 32099-015 BOX battery. Why would the A4's not use a spill tray when other models before and after do? The ZPower parts book was compiled by ZPower, has faults ...

Have you got the moulded plastic case the battery sits in?

Zoom in gives you correct finish