28012-1002

Glynn,this part number has been superceded.
I would check with Big Phil @ Z-POWER

Nice one Keef.
I'll give you the feck all when I see you

I'm not cutting up a good frame as it defeats the object.
Basically I just need the frame cradle with the engine mounts

I'm after a scrap/damaged/etc 1000J motor type frame from 1981-1986. I basically just need the engine cradle,so not bothered about damaged top tubes,headstock,subframe,rust or rot,etc It must have the engine mountings in tact other than that anything considered. Z1000J Z1000 LTD Z1000 CSR Z1100A SHA...

Any J type motor will have the cam cover you need including the uni-trak 1100.
So any u.k. spec J,LTD,ST GPz 1000cc/1100cc will do.

36mm RS Mikuni flatslides are a good choice for an 1170 motor
Maybe 38mm if you have head work such as larger valves,porting,gas flow,etc.

Speak to John Browse 01978 355556 in Wrexham.
He's usually got frame wlb and project bikes available.

From the tank and side panel,I'd say it's either an LTD or CSR
Model year 81/82

I've got a spare 17mm 1000J crank,then you can go LARGE

http://www.ebay.co.uk/itm/MTC-Kawasaki- ... 3a8d79e926

75mm bore which gives 1170cc is the largest size with the standard cylinder block.
Any larger will require sleeves and the crankcases to be machined also.

This should be in The Bottom Shed as it is non Z

Maybe the board moderators or admin can help you out Roy.
The link works when i click on it
You have to put your photos into Phtobucket,then link them to here

Roy,this is the link to show how to post photos:
http://www.z1ownersclub.co.uk/forum/vie ... hp?t=14667

Paul,can you email me some photos of the seat please ??