That looks like a vacuum tap.

Thanks for the tip,becker. Ill have a look at that Any particular model/year or are they all the same?

KZ1000CSR(81) Ok,Im ready to give up.Tank has been cleaned and tap rebuilt,I dont know how many times. Inline filter fitted and 4x new sets of float needles and seats fitted. Fuel still pissing out all over the place when the bike is parked up. All will be well for 2,3,4 weeks,then it just lets go.I...

1981 J model engine

Looking for a 'Transmission cover'. The engine cover that sits between the front sprocket and the crankcase.Mine lost the chain at some point and broke a good chunk away from it . Posting to Amsterdam. Thanks.

Also looking for a 'road' baffle for a Harris pipe.

I have a KZ1000CSR seat foam, if that works for you. Its old and mangy but complete. You can have it for the postage.Im in Amsterdam.

I had the same bendy bolt problem on my CSR 1000. I bought a replacement bolt from CSMNL (It turned out to be un-plated!) and it wasnt until I tried fitting it that it occurred to me that the engine was out of whack with the frame!! I had to take the whole thing to get it straightened and braced. Is...

Fitted a second rebuild kit in my 1000CSR fuel tap a couple of weeks ago. Discovered a pool of fuel under the bike again today.Taking off the tank,the fuel is pissing out all over the place in both 'On' and 'Res' positions.Agin! Ive read that this is a common fault with old Kawasaki vacuum taps. Is ...

Looking for a 'Plate-clutch Operatin' as its called on CMSNL. (The plate on which you mount all the clutch pressure plates and steel plates.) On trying to remove mine,Fuckwit me bolted an aluminium bar onto2 of the clutch spring mounting points to act as a break against the 30mm socket I was using t...

I have one from a CSR1000 (81 ish) if thats any good to you. Its a bit chewed at one end but servicable and seemed to work ok when I took it off the bike.

Thanks Julian but would a db killer not also restrict the exhaust? Are db killers brand specific? Do I need/can I get one for a Harris or are they universal?

The race baffle in my Harris sounds a bit too enthusiastic! Anybody got a road baffle in reasonable nick?

Thanks everyone. The seatcover was made by my honey bunny,The Harris is from Martinz1000r(from this site) and I hope to be picking up a pair of fork extensions by the end of the week.

Here you go. KZ1000CSR. 2 1/2year(+ -) Basement build. Still havent got the hydraulic clutch working right and the carbs need fiddling and Im waiting on a pair of extenders for the forks. Other than that,its done de done done. http://i1382.photobucket.com/albums/ah249/navillusodivad/KZ1000CSR001_zps...

Les, the stuff arrived t'other day. I guess it was just the crimbo rush and today I got a reply from the company itself,which was reassuring.So, no problems and I would use them again.

Lescr, did they make contact in the end? Reason I ask is I ordered some tank decals off them on ebay.Promised delivery was yesterday at the latest. I just clicked the 'Did not recieve' button tonight and googled the name,which brought me to this thread. Normally Im not so impatient and I understand ...