These have been recently used on my own zed whilst running it in. Since i have now aquired some RS Flatslides, these are no longer required. DSC03162.JPG DSC03163.JPG DSC03164.JPG DSC03167.JPG DSC03169.JPG DSC03170.JPG DSC03172.JPG DSC03173.JPG Vapour blasted, ultrasonically cleaned, rebuilt using n...

No worries Mark. I thought i had sent you a message saying i had been diverted but on checking i obviously haven't. That's what its been like recently, just not enough time
If HartyB doesn't have it off you, i will but seeing as you've told him he can have it, that's fine

Things been mental recently. Have you still got the lathe as i am definitely still interested

So got a load of parts from the CNC guys today: DSC03143.JPG DSC03144.JPG First up is trying the new LH wheel spacer which now sits on the ledge properly allowing the wheel to sit in exactly the right place for the axle to slide straight in unsupported. Its a push fit into the bearing so stays on th...

Surplus to requirements. Comes with sprocket, carrier, cush drive, rear disc etc. I think some of the disc bolts may be missing.

£100 posted or make an offer.

Even better. I will be over your way next Thursday. You going to be about?

Drool......

I may have to come and see you. Definitely interested. I know you said don't ask anything technical, but metric dials?
Cheers

So booking in for Bikers Classic in July has given me the hurry up. Better get (even) busier :shock: After trying to locate an endurance style belly pan that will actually fit the wide P&M frame and hold an engine full of oil and look the part i gave up and took the cutting disc to the "XR6...

Decided to make a cover over the sprocket to stop splashing up the hole, so to speak :P IMG_20180210_153445.jpg Made up from a piece of 2mm ally plate and backed with 1mm rubber sheet IMG_20180216_160609.jpg Fits between the outrigger plate posts neatly and is in there pretty tight once the plate bo...

The bike was missing a rear brake cylinder and its bracket, so i got an R1 cylinder off ebay for £20 (like new) and started with cardboard, then progressed to 8mm ally plate. I chose 8mm because i wanted to have the bracket support the mega off its front mounting and this was the thickness between t...

Ha, used to live in Rangiora

I'll have one KWAKERZ1. Either for the Zed or more likely the P&M GPZ (if its finished in time?)

Pay you on Paypal?

Cheers,
ZZ

Excellent work - well hacked off those correctors got lost !!!

Me too matey. Only thing i have seen lost in the post for ever and so precious too. Checked with neighbors but i am on the lookout for a local postman with a 70's/80's jap bike running pods

Time to get the carbs off for the following: Pilot jets up from 17.5 to 20 Main jets down from 130 to 120 Install air corrector jets Mr Pigford had sent me a set of 0.6mm air corrector jets that i was going to fit to my carbs. Unfortunately Postman Pat decided to keep them for himself :evil: To reme...