I took possesion of this one recently.I got it from Phil at Z-power who had owned it for a couple of years.Prior to that it had been off the road since '97. Here is how it arrived to me

It's been some time since i've done any work on this one. In my defence is did a lot of work on the 71 Dodge before i sold it and have also recommisioned a ZX1100 that has been laid up since the mid 90's. The engine was rebuilt some time ago by Graham Salter down in Batley and the other day i though...

This part is no longer available.I could do with one too,it's a real oddball part as it's different diameter at each end and the curves are pretty sharp.I'll be interested to know if anyone has made a good alternative too. Good Luck !

Thank You for the info .... Am i correct in thinking that this event will need an ACU license as opposed to running on a RWYB basis ?

Wow !! Those keyrings are gorgeous !

1000ST seat https://www.ebay.co.uk/itm/334245200020?_trkparms=amclksrc%3DITM%26aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D20200818143230%26meid%3Dac45f8eec504493db67b2ff115cd1f51%26pid%3D101224%26rk%3D1%26rkt%3D5%26sd%3D283089900138%26itm%3D334245200020%26pmt%3D0%26noa%3D1%26pg%3D204767...

That replica Harris looks bang on... I've tried to have a look at the motoarbo website but it's all down... Did you just call 'em up ?

z1bman wrote:there is a resistor in the grey wire from the ecu its for the engine temp sensor

That's great info,never knew about that

Have you had the injectors cleaned ? I've just had some done on a Unitrak that had not been started since '97 and they were not flowing very much.
I used Injectorclean at Devises.It's a mail order service and they send you a graph showing before and after....

Nice looking bike you have there. If you've managed to find a Harris pipe you've done right well

Some lovely looking Z1-R's in the club.... Seen a few people using the Delkevic exhaust now

rpeters wrote:I May have one I will check later.
Rob

Cheers Rob

Hi Gents As the title says I'm looking for a fuel tap for a 1983 GPz1100 uni-trak. Secondhand and good is fine. If anyone can point me towards a pattern part that's known to work that's also good . I've heard that Pingel do one,so if anyone has experience with this one I'd appreciate any feedback Ch...

Hi Gents. I've just bought a 83 ZX1100 and the fuel pump refuses to play ball. When i switch the ignition on i just get a 'click' but no sign of movement. To check any problems with the electrics i've hot wired it with the same result. Does anyone have a known good pump or can give me a modern one t...

What an amazing find...... Great news that it fired up so easily