Thanks Steve, copied that, certainly helps finding out what original finishes were from part number.

Possibly this
https://www.youtube.com/watch?v=Py4kHgtx8bA

Compo, I can get my hands on something like that from a friend who does drainage etc. but not today so I've used mine again which does self level and has a cross but doesn't tell you angles. IMG_20231001_124058_4.jpg The first thing I did was set a piece of 9mm glass level and set the bottom yoke on...

Got a Clinometer and went for a play. Checked everything possible, horizontal brace under the seat, the horizontal bracket that bolted to the frame rear of the fuel tank, both were the same. The 2 outside horizontalish spine tubes, same, each fork, same but the 2 forks differed by 1 deg. the rh one ...

Cheers, I'll download the one you use and try it out

Al. is this the one you use?
https://play.google.com/store/apps/deta ... l=en&gl=US
Cheers

Ta, yes it's an an optical illusion. I was looking at the headstock, the forks must have turned slightly

I wasn't looking to centralise the frame from the engine, just to make sure it vertical Rob, though the engine cradle could be buggered so that would throw that out of the equation. Regarding the twist, It looks like it's bent in the middle and the headstock is also twisted. Just going by the laser,...

Thanks both. I was thinking a do at home version Al. I was worried about using the engine and the laser lines seem to contradict each other. Were you looking for wheel alignment as a priority?

Did an initial check in the garden on a concrete pad. confirmed verticalness of engine. IMG_20230915_201710_0.jpg Then checked the rear wheel IMG_20230915_202726_6.jpg Needed to check the front end, partially stripped to moved it into the garage IMG_20230923_140613_6.jpg Check on the rear wheel from...

Just the other side of Lyon Rob

Not really any help but these are for sale (unless Philippe buys them) but they are 6 hours away from me. https://www.leboncoin.fr/offre/equipeme ... 2414125608

Can't help with the bike but she's also selling 3 Triples. Also, in the feedback I see that she's bought something off Nigel Ultim8pc, maybe he can shed some light

Cheers Warren, when you say use the engine, I can vertically laser the fins on the outside of the crank casings or use the ally mag and ignition covers where they mate to the engine. I suppose it doesn't matter to much really or were you thinking over somewhere else? I could possibly get the laser t...

Ever since getting the ST home a few years ago I realised the frame or yokes were twisted. I've lived with it for a couple of years but now it needs new boots I'd like to try to narrow it down. Bit of background info: The front wheel sits to the left by 1.5 inches when a straight edge is offered up ...