Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Vance&Hines oval can NOW SOLD ( locally)
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Vance&Hines oval can NOW SOLD ( locally)
For sale this cut down oval alloy Vance& Hines SSR2 can - I had it on my Z1000 for a while but replaced it with a megaphone. It's been cut down in length by about six inches as it was originally quite long, but it's not overly noisy, and it's quite compact. I can also include the stainless link pipe and the collector which fits ExhaustCraft Harris style headers. If you wanted to make up a complete exhaust you'd just need some headers off Dave. It would need two springs for the can/link pipe, I used Yoshimura ones which I transferred to the new setup. If using the whole thing refer to the pics as my passenger footrests and therefore exhaust hanger is quite high up compared with where the exhaust hanger normally is.
Looking for £75 for the can and link pipe/collector, split £60 for can £25 for collector. +post. Any queries, offers or more pics just ask.
Looking for £75 for the can and link pipe/collector, split £60 for can £25 for collector. +post. Any queries, offers or more pics just ask.
You do not have the required permissions to view the files attached to this post.
- 8 Valve Mark
- Custard Cream
- Posts: 966
- Joined: 3rd Nov 2016
- Location: Glasgow, tropical west Scotland
Re: Vance&Hines oval can
I'll take the link pipe please chris. m
-
- Custard Cream
- Posts: 804
- Joined: 20th Oct 2016
- Location: Ipswich
Re: Vance&Hines oval can
What diameter is the pipe on the engine side of the can?
An expanding collection of parts pretending to be a Z1100R and a Yamaha FZ750
Re: Vance&Hines oval can
Julian_Boolean wrote:What diameter is the pipe on the engine side of the can?
50mm
Re: Vance&Hines oval can
Link pipe sold.
-
- Custard Cream
- Posts: 804
- Joined: 20th Oct 2016
- Location: Ipswich
Re: Vance&Hines oval can
chrisNI wrote:Julian_Boolean wrote:What diameter is the pipe on the engine side of the can?
50mm
Too small for me
An expanding collection of parts pretending to be a Z1100R and a Yamaha FZ750
Re: Vance&Hines oval can
Julian_Boolean wrote:chrisNI wrote:Julian_Boolean wrote:What diameter is the pipe on the engine side of the can?
50mm
Too small for me
It's the same size as a Harris I know the Kerkers are bigger but I think most are that size.
Re: Vance&Hines oval can
Julian_Boolean wrote:What diameter is the pipe on the engine side of the can?
This is actually 54mm/2.13 inches on the engine side of the can, the link pipe was 50mm but we sleeved it up to fit, I had forgotten about this until I took it off just now. Dont know if this helps or not...
-
- Custard Cream
- Posts: 804
- Joined: 20th Oct 2016
- Location: Ipswich
Re: Vance&Hines oval can
chrisNI wrote:Julian_Boolean wrote:What diameter is the pipe on the engine side of the can?
This is actually 54mm/2.13 inches on the engine side of the can, the link pipe was 50mm but we sleeved it up to fit, I had forgotten about this until I took it off just now. Dont know if this helps or not...
Unfortunately not, my Kerker has a gaping 63mm hole, like a wizards sleeve
An expanding collection of parts pretending to be a Z1100R and a Yamaha FZ750
Re: Vance&Hines oval can
Yeah I have a Kerer in the garage too it’s a whole lot bigger...
-
- 100Club
- Posts: 221
- Joined: 30th Nov 2007
- Location: leicester,uk
Re: Vance&Hines oval can
hey Chris, Kerker for sale?
Re: Vance&Hines oval can
trikerdrew wrote:hey Chris, Kerker for sale?
No I need it...
Who is online
Users browsing this forum: Hobbo and 7 guests