These have been recently used on my own zed whilst running it in. Since i have now aquired some RS Flatslides, these are no longer required.
Vapour blasted, ultrasonically cleaned, rebuilt using new gaskets, jets, needles etc. Some threads are now heli-coiled, stainless cap heads throughout, new brass delivery t-peices.
Lots of parts have been zinc plated and polished by Mikey.
They have been fitted with home-made air corrector jets made from Nylon to correct running issues just off idle for pod filters. If you dont want these, they can be easily drilled out. Works well but will require final jetting for your application.
The fuel enrichment circuit is a bit worn so is very rich on choke, but fine once off.
Lots of parts as well. Jets, needles, gaskets, float valves etc.
Looking for £300 plus post
I also have the pod filters and inlet rubbers
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Mikuni VM26's
Moderators: paul doran, Taffus, KeithZ1R, chrisu
- Zomerset Zed
- 100Club
- Posts: 239
- Joined: 30th May 2014
- Location: Somerset
Mikuni VM26's
You do not have the required permissions to view the files attached to this post.
Who is online
Users browsing this forum: No registered users and 77 guests