Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Steel box section braced swing arm
Moderators: paul doran, Taffus, KeithZ1R, chrisu
- z1000puddin
- Custard Cream
- Posts: 891
- Joined: 23rd Jul 2011
- Location: Aberdeen,Dyce
Steel box section braced swing arm
Not 100%sure what this is off of.
It looks to be either JMC or Metmachex
Not ally, it’s steel.
Has the ecentric bosses.
No bearings fitted.
It’s 231mm at the pivot
It’s 248mm inside between the wheel bosses
I assume it’s possible if a zed 1000J ??
But not sure
Looking for £65+ postsge
It looks to be either JMC or Metmachex
Not ally, it’s steel.
Has the ecentric bosses.
No bearings fitted.
It’s 231mm at the pivot
It’s 248mm inside between the wheel bosses
I assume it’s possible if a zed 1000J ??
But not sure
Looking for £65+ postsge
You do not have the required permissions to view the files attached to this post.
Zed til Dead
Re: Steel box section braced swing arm
That will be a Davida to fit a Z1000J, Z1000R, Z1100R or GPz1100B. Other than your eccentrics being anodised blue it's identical to the one in my J (before I modified it).
Re: Steel box section braced swing arm
Yes Stu as Coose has just said , it's one of Mr. Fiddaman's specials .
0172 . Geoff Parr
Re: Steel box section braced swing arm
And, it's probably the one single item that made the biggest improvement to my chassis, so £65 is an utter bargain!
- 8 Valve Mark
- Custard Cream
- Posts: 966
- Joined: 3rd Nov 2016
- Location: Glasgow, tropical west Scotland
Re: Steel box section braced swing arm
hi puddin i could probably utilise it mate. is the wheel spindle hole standard Kawasaki size? cheers mark..
- 8 Valve Mark
- Custard Cream
- Posts: 966
- Joined: 3rd Nov 2016
- Location: Glasgow, tropical west Scotland
Re: Steel box section braced swing arm
just a thought gents;didn't davida upgrade/double-up the pinch bolts for the eccentric wheel/chain adjusters?at some point? hmmm..
Re: Steel box section braced swing arm
It uses a spindle which has a keyway and an M18 nut at each end. One eccentric has two M4 grubscrews inside to slot into the keyway, where there should be a key in the other end. It's quite a lot longer than the stock spindle, where on mine I had to space even a stock wheel though there's a possibility that mine was made for a different wheel?
Mine has single pinch bolts and has not been a problem.
Mine has single pinch bolts and has not been a problem.
- z1000puddin
- Custard Cream
- Posts: 891
- Joined: 23rd Jul 2011
- Location: Aberdeen,Dyce
Re: Steel box section braced swing arm
Thanks Guys, What a world of knowledge there is on here
Mark,
I will check tonight & replay
Stu
Mark,
I will check tonight & replay
Stu
Zed til Dead
Re: Steel box section braced swing arm
Here's a Davida Moto on my old 'J' which has twin pinch bolt arrangement.
You do not have the required permissions to view the files attached to this post.
Kawasaki GPz750T, Kawasaki ZRX1100R, Kawasaki GPZ1000RX, H**** VF1000RG Rothmans, H**** VF500F2F, H**** CB1100RD, Suzuki GSX1100EFE, H**** XL125K2
- z1000puddin
- Custard Cream
- Posts: 891
- Joined: 23rd Jul 2011
- Location: Aberdeen,Dyce
Re: Steel box section braced swing arm
Mark
It is 18.5mm hole , that would be to suit the M18 spindle
It has the keyway & the 2 x m4 tapped holes on the ecentric adjusters
It is 18.5mm hole , that would be to suit the M18 spindle
It has the keyway & the 2 x m4 tapped holes on the ecentric adjusters
Zed til Dead
- z1000puddin
- Custard Cream
- Posts: 891
- Joined: 23rd Jul 2011
- Location: Aberdeen,Dyce
Re: Steel box section braced swing arm
If No Takers, I will put it on evil bay.
I am going to clear ALL the spares that I have shortly for the 1100r jigsaw puzzle that I bout as its nearing the end of the build.
I will be moving house, so everything will be going
I am going to clear ALL the spares that I have shortly for the 1100r jigsaw puzzle that I bout as its nearing the end of the build.
I will be moving house, so everything will be going
Zed til Dead
Re: Steel box section braced swing arm
I'm not renting a van again!!!
- z1000puddin
- Custard Cream
- Posts: 891
- Joined: 23rd Jul 2011
- Location: Aberdeen,Dyce
Re: Steel box section braced swing arm
HA HA HA
Why not Gary, you got a very good deal the last time
Why not Gary, you got a very good deal the last time
Zed til Dead
Who is online
Users browsing this forum: No registered users and 101 guests