Nice crank for MkII engine.
Photo's to follow - £75 - collection North Dorset - Yeovil area
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1000 MkII CRANK
Moderators: paul doran, Taffus, KeithZ1R, chrisu
Z1000 MkII CRANK
And on the 7th day... Zeds were created!
Re: Z1000 MkII CRANK
Am I right in saying MK2 crank has 16 teeth for the camchain? But are the small ends 17mm for gudgeon pin? I think these are the best / strongest cranks for drag racing, interested Pigford, just got to see what a set of 32 teeth cam wheels are and a 124 link camchain cost. Thanks. Buzzard@thebuzzworkz.
Every man should have a shed (for bikes obviously..)
Re: Z1000 MkII CRANK
buzzard wrote:Am I right in saying MK2 crank has 16 teeth for the camchain? But are the small ends 17mm for gudgeon pin? I think these are the best / strongest cranks for drag racing.
Yes! Correct but also need to remember that they have a larger dia alt taper too so not a straight swap to the earlier motor without using the later alt and cover to match.
Re: Z1000 MkII CRANK
Thanks for the info Rob, I didn't know about the generator taper, it's never quite that simple. Still learning things. Buzzard@thebuzzworkz
Every man should have a shed (for bikes obviously..)
Re: Z1000 MkII CRANK
sent you a whats app message
Z900A4, Z1000A1, Z1000ST E1,E2, Z1000Mk2 A3,Z1000H Z1R D1, z1000j3, Z1000P. Z900RS SE,
Z1300 A1,
GPZ1100 Unitrack, GPZ750E, GPZ 750Turbo, GPZ900r A1, A2, A6
ZZR1100 Purple and orange
KE175b, KE175F
along with some lesser makes
Z1300 A1,
GPZ1100 Unitrack, GPZ750E, GPZ 750Turbo, GPZ900r A1, A2, A6
ZZR1100 Purple and orange
KE175b, KE175F
along with some lesser makes
Who is online
Users browsing this forum: No registered users and 87 guests