Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
CNC parts being made.
Moderators: paul doran, Taffus, KeithZ1R, chrisu
CNC parts being made.
I'm having some parts CNC made by Fastec Racing, some oil cooler pipe take off parts, £100 to £150, just interested if anyone would want to purchase some, price is very dependant on quantities so I'm just seeing if there's any demand. Also maybe having the four engine brackets for Z1, Z1A,Z1B CNC made out of ally but that depends on quantities again. Had the quote. Sorry its abit vague, just testing the water. Thanks. Bazzard@ thebuzzworkz.
Every man should have a shed (for bikes obviously..)
- Ginger Bear
- Hardcore
- Posts: 5512
- Joined: 16th Dec 2008
- Location: In the Dark.
- Contact:
Re: CNC parts being made.
Sounds interesting Dave. Good luck with this, I'm sure it'll do well.
Re: CNC parts being made.
Dave,
You can get takeoffs for about $70 from the USA but with shipping/duty etc I'd guess close to $100 ish delivered to UK. Maybe a bit more.
So I'd say £100 not out of the ballpark but £150 probably a bit expensive.
You can get takeoffs for about $70 from the USA but with shipping/duty etc I'd guess close to $100 ish delivered to UK. Maybe a bit more.
So I'd say £100 not out of the ballpark but £150 probably a bit expensive.
Re: CNC parts being made.
Engine brackets
Re: CNC parts being made.
Chris, it's all about the amount you have made to get the price down hut you know that, it's abit borderline but if you make enough the price comes down considerably, at the moment I'm looking at 12 sets but that's still a load of money. It's the same with the engine brackets. Just trying to get some stuff made. Buzzard@thebuzzworkz.
Every man should have a shed (for bikes obviously..)
Re: CNC parts being made.
I'd be keen on the 2 front engine brackets as I have an a4.
Maybe worth a thought?
Regards
Tim
Maybe worth a thought?
Regards
Tim
Z900a4, BMW 1200GS, KTBFFH
Who is online
Users browsing this forum: No registered users and 73 guests