Page 1 of 5

One way to get the lad off the bloody computer

Posted: Mon Oct 19, 2015 10:21 pm
Author: Is Vic There
Righto Gents,

I was getting fed up with my lad spending all weekend on his computer, it was getting to the point that I didn't have anything to say to him, nowt in common!

So when this came up on Facebook I thought stuff it that's a project!

The plan is to do her up and it will be his first car, first job was to sort out all the spares and give her a good clean, take off the additional fitments that had been fitted in the past 50 odd years and go from there!

How we bought it!

Image

And then a bit of a wash down!

Image
Image

Plan is to take the bodywork off this Saturday, I only want to work on it on a Saturday morning, anymore will be too much, just want to try and keep him keen!

Anyone have any experience on these or any suggestions appreciated!

:D

Posted: Tue Oct 20, 2015 6:31 am
Author: mick znone
series 11 or 11a Vic, lovely machine, still got the 2.25 engine? petrol or diesel?

Posted: Tue Oct 20, 2015 7:35 pm
Author: Is Vic There
Its a 2a Mick, got the original petrol engine and box in, also came with a spare of each, if you have a look in the racking there's a pallet with loads of spares on it!

Back in work Saturday, going to take the body off!

Posted: Tue Oct 20, 2015 8:21 pm
Author: jphaynes669
Vic....I dont think that fork truck is big enough....anything any bigger :lol: ?

Posted: Thu Oct 22, 2015 9:26 pm
Author: 101jim
landys are great fun and will always improve your welding and spannering skills just finishing my disco 1 was only going to be a little bit of work for mot 3 months latter and lots of bits latter just got to waxoil this weekend then the fun can start again,good luck with the 2a and keep the pics coming

Posted: Sat Oct 24, 2015 11:38 am
Author: Is Vic There
Well, this morning didn't start to well with the lad saying he was sick! I made him come with me and after an hour he turned round and thanked me for making him! I was made up with that!

Four hours in and we'd done what we wanted!



The most important thing is we'd had a great talk and a laugh, can't do that on a computer!

Well he named him "Bullet" due to finding a shell case!



Image
Image
Image
Image

Posted: Sat Oct 24, 2015 1:07 pm
Author: 101jim
looks like you got yourself a realy sound landy their chassis and bulkhead look in great condition

Posted: Mon Oct 26, 2015 7:41 pm
Author: Is Vic There
That's this weekends job Jim, bulkhead removal!
Picked up a spare engine yesterday, also been reading a few forums and gaining valuable knowledge, looking forward to the rebuild!

Posted: Mon Oct 26, 2015 10:22 pm
Author: 101jim
have fun with that vic if theres any bits you cant get give us a shout and ill find them over here and post

Posted: Mon Oct 26, 2015 11:16 pm
Author: z1bman

Posted: Tue Oct 27, 2015 7:11 am
Author: Is Vic There
101jim wrote:have fun with that vic if theres any bits you cant get give us a shout and ill find them over here and post


That's very nice of you Jim, thank you.

Posted: Tue Oct 27, 2015 7:13 am
Author: Is Vic There
z1bman wrote:http://www.v8engines.com/projects-008.htm


I'll have a read of that tonight, won't be putting a V8 in it, kids can drive at 15 over here so a 50 year old 2.25 Petrol will do for the time being :D

Posted: Sat Nov 07, 2015 9:45 pm
Author: Is Vic There
Had another great day on the Landy, very impressed with my lad, first thing he did was to go to the tool box and get all the 7/16 1/2 9/16 5/8 spanners and sockets we needed, then I showed him what needed to come off and he got to it!

I tackled the ugly box section fence post that had been welded to the front part of the chassis, first I took the bolt on steering damper off and cut out the box section that must have been to mount spotlights, easy job with a cutting disc! Then the box section, now this took a few hours due to the position and the size of the grinder I was using, in the end we managed to get it off. It uncovered that the chassis was split, I thing that originally they had bolted the steering damper through the chassis this has put to much stress on it and its eventually split near the bolt holes.

Image


This is a picture of my lad just finishing off the fire wall, just need to get it blasted this week and then its off for repair!

Image

Image


Engine and box out next week!

Posted: Sun Nov 08, 2015 6:36 am
Author: mick znone
isnt it great to have a 4 wheeled vehicle that you CAN take apart. Excellent work showing the lad what fun can be gained by getting stuck in Vic.

Posted: Sat Nov 14, 2015 3:58 am
Author: Is Vic There
Another great Saturday morning working on the 2a, great to spend time with my lad, he's getting well into it as well.

Took the engine and box out, gave them a good steam clean ready for stripping in the next few weeks.

Also gave the chassis a good degrease and steam clean, very happy with the progress so far.

Next week we'll tray and get all the ancillaries removed from the chassis and get it off to the sand blasters ready for the Ho Har's to repair it.

Really enjoying this project so far.

Image



Image



Image



Image