Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

z power center stand

Talk about all your non-Zed or even Kawasaki bikes here.

Moderators: chrisu, paul doran, Taffus, KeithZ1R

Message
Author
User avatar
gpjes
100Club
100Club
Posts: 230
Joined: 13th May 2013
Location: Bingley West Yorkshire

z power center stand

#1 PostAuthor: gpjes » Sun Mar 31, 2019 8:32 am

Anyone ever had a problem with the leg arm of the z power main stand bending on operation? I bought a brand new one a few years ago never used it, and sold it to my mate who spent a few hours fitting it to his A4 hoho, if you must have the four pipes :D expect the extra work, yes he's bent it so its lower than the LH foot of the mainstand so a bit wobbly :biggrin just wondered if anyone else has had a problem with this bit? I can probably move it back upwards with a bit of gentle pressure :twisted:
More Smiles Per Mile

chrisw1
100Club
100Club
Posts: 362
Joined: 13th Mar 2017
Location: Oswaldtwistle

Re: z power center stand

#2 PostAuthor: chrisw1 » Sun Mar 31, 2019 6:07 pm

mine fitted perfectly 1st time and has been great ....I also have 4 pipes

crossthread
Regular Poster
Posts: 68
Joined: 15th Oct 2017
Location: Devon

Re: z power center stand

#3 PostAuthor: crossthread » Mon Apr 01, 2019 8:53 am

Did I mis-read that? What's bent , the stand or the exhaust ? A stand that that you can bend back with " gentle pressure " sounds a bit dodgy !!!

User avatar
Garry.L
Hardcore
Hardcore
Posts: 2630
Joined: 11th Jun 2011
Location: Cheapest Cheshire

Re: z power center stand

#4 PostAuthor: Garry.L » Mon Apr 01, 2019 9:37 am

Don't know if it's the same with Zeds but Seem to recall this coming up a while ago with Pattern Triple stands. Seems the metal is much thinner and easier to bend.
Last edited by Garry.L on Mon Apr 01, 2019 5:04 pm, edited 1 time in total.
ʎɐqǝ uo pɹɐoqʎǝʞ ɐ ʎnq ı ǝɯıʇ ʇsɐן ǝɥʇ sı sıɥʇ

A1John
Custard Cream
Custard Cream
Posts: 784
Joined: 16th Jan 2012
Location: Midlands

Re: z power center stand

#5 PostAuthor: A1John » Mon Apr 01, 2019 11:16 am

I got one last year no problems just a strong as the original.

User avatar
flateddie
100Club
100Club
Posts: 132
Joined: 22nd May 2014
Location: Weston Super Mare

Re: z power center stand

#6 PostAuthor: flateddie » Mon Apr 01, 2019 11:42 am

I have one on my z1000 a1 and its spot on
z1000a1, z1000b2, Aprilia v4 Tuono factory, GSXR 1000 k6

User avatar
Ultim8pc
Hardcore
Hardcore
Posts: 1580
Joined: 5th Sep 2014
Location: Keighley, West yorkshire
Contact:

Re: z power center stand

#7 PostAuthor: Ultim8pc » Mon Apr 01, 2019 9:21 pm

Having seen the stand in question, I'd say it's a repro - I have never seen an OEM stand bend and crease. I would suspect that if you bend it back it will go again.
http://www.airevalleyclassics.co.uk
http://www.quick-glo.co.uk
ZRX1200r - on the road
z900a5 - on the road
z1a - to restore
Z1000 MK2 - to restore
z1000a1 - In bits
z1000ST - in bits


Return to “The Bottom Shed”

Who is online

Users browsing this forum: No registered users and 6 guests