Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
z power center stand
Moderators: paul doran, Taffus, KeithZ1R, chrisu
z power center stand
Anyone ever had a problem with the leg arm of the z power main stand bending on operation? I bought a brand new one a few years ago never used it, and sold it to my mate who spent a few hours fitting it to his A4 hoho, if you must have the four pipes expect the extra work, yes he's bent it so its lower than the LH foot of the mainstand so a bit wobbly just wondered if anyone else has had a problem with this bit? I can probably move it back upwards with a bit of gentle pressure
More Smiles Per Mile
Re: z power center stand
mine fitted perfectly 1st time and has been great ....I also have 4 pipes
-
- Regular Poster
- Posts: 69
- Joined: 15th Oct 2017
- Location: Devon
Re: z power center stand
Did I mis-read that? What's bent , the stand or the exhaust ? A stand that that you can bend back with " gentle pressure " sounds a bit dodgy !!!
Re: z power center stand
Don't know if it's the same with Zeds but Seem to recall this coming up a while ago with Pattern Triple stands. Seems the metal is much thinner and easier to bend.
Last edited by Garry.L on Mon Apr 01, 2019 5:04 pm, edited 1 time in total.
ʎɐqǝ uo pɹɐoqʎǝʞ ɐ ʎnq ı ǝɯıʇ ʇsɐן ǝɥʇ sı sıɥʇ
Re: z power center stand
I got one last year no problems just a strong as the original.
Re: z power center stand
I have one on my z1000 a1 and its spot on
Z1b, z1000a1 x 2 , Aprilia v4 Tuono factory, SV1000
Re: z power center stand
Having seen the stand in question, I'd say it's a repro - I have never seen an OEM stand bend and crease. I would suspect that if you bend it back it will go again.
http://www.airevalleyclassics.co.uk
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
Who is online
Users browsing this forum: No registered users and 75 guests