Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
New Project
Moderators: paul doran, Taffus, KeithZ1R, chrisu
Re: New Project
Little bit of progress on GS bottom end now in and rings gapped on pistons now and fitted , the dreaded barrel next
not a easy feat with two hands
not a easy feat with two hands
Re: New Project
Barrel dropped on fairly easy so onto another of my favourite jobs doin the valve clearances
Re: New Project
Got the barrel on in-between riding Kawasakis then started to refit the Harness i'm redoing all connectors once
it's layed where it should be front to back not one of my favourite pastimes but a necessary evil on this butchered
bastardised one, its in good nick in headlight just req a good clean but further back where someones removed indicator
self cancel switch and its box its one of worst i've but i'm getting there.
it's layed where it should be front to back not one of my favourite pastimes but a necessary evil on this butchered
bastardised one, its in good nick in headlight just req a good clean but further back where someones removed indicator
self cancel switch and its box its one of worst i've but i'm getting there.
Re: New Project
Slow progress on GS but electrics well on the way and Head back on , brake calipers and masters back from
Dave @ Powerhouse excellent job as usual , best get my finger out now Sean says paint will be done first week
in September
Dave @ Powerhouse excellent job as usual , best get my finger out now Sean says paint will be done first week
in September
Re: New Project
Coming along nicely Bill, what exhaust are you going for?
Re: New Project
Cheers Zapo , i've got its original system which i think will clean up ok but my memory's crap so have to see what
it's like when i dig it out . I put a four into one from Moto GP Werks in California on last one i did which sounded
nice if needs be. You doing ok i hope , kettles on when your next riding this end of Derbyshire.
it's like when i dig it out . I put a four into one from Moto GP Werks in California on last one i did which sounded
nice if needs be. You doing ok i hope , kettles on when your next riding this end of Derbyshire.
Re: New Project
Bill P wrote: You doing ok i hope , kettles on when your next riding this end of Derbyshire.
All good with me, bike running sweet as a nut.
Nearly popped in last week after getting lost in the hills
See you next time.
Cheers
Re: New Project
Had to roll her of the bench for a little bit of maintenance service work on the Triumph TR6c
including a new Amal Premier carb
including a new Amal Premier carb
Re: New Project
I got a new "non-leak" float for my Amal for me Trumpet few years back as the old one was half full of fuel - no wonder it ran rough
I believe Wassell do an Amal copy now - not great allegedly?
I believe Wassell do an Amal copy now - not great allegedly?
And on the 7th day... Zeds were created!
Re: New Project
Yep to be avoided i'm told , got mine from Burlen's the carb people so hope its the real deal
Re: New Project
Couple more bits done ,Brakes back on now after a Powerhouse rebuild and spot on as usual cheers Dave , carbs are ready for
reassembly now but its a job i hate so keep avoiding it and playing with another bike , a few piccies hopefully attached.
Also my KZ900B callipers fresh back from Dave .
reassembly now but its a job i hate so keep avoiding it and playing with another bike , a few piccies hopefully attached.
Also my KZ900B callipers fresh back from Dave .
Re: New Project
Pictures worked this time Not managed to find correct Left bar switches yet but got genuine throttle tube and grips
which were Genuinely eye watering price
which were Genuinely eye watering price
Re: New Project
Looking good Bill! Keep the photos coming. I have a nice GS1000G so I’m interested in your progress!
Who is online
Users browsing this forum: No registered users and 101 guests