Page 1 of 1
Z1-A debut
Posted: Tue Jun 01, 2021 1:46 pm
Author: MrDavo
As reported in 'Projects' my Z1-A made its debut after a long rebuild this weekend. I'm running in fresh bores, pistons and valves, so keeping the revs way down for the first 500 miles, I'm up to 140 already. She feels smooth and sure footed, I can't go quick enough to look for speed wobbles yet.
Here she is parked up above Holmfirth on the 'Isle of Skye' road, I stooped for a bacon butty from the van.
Day two, exploring East Lancs out above Burnley, I spotted a parked tribute act to my bike, a modern 900RS. The rider was chuffed that I stopped, as he wanted to see the 'real thing'. I declined his offer of a straight swap, well I would at 2X the value.
Nice paint job, I did point out that his engine looked like something out of a washing machine though.
Re: Z1-A debut
Posted: Tue Jun 01, 2021 3:38 pm
Author: DavidZ1R
Let me know when you get up to Rivington Barn.
Re: Z1-A debut
Posted: Tue Jun 01, 2021 3:59 pm
Author: Philippe
Hi MrDavo
glad to see that she runs smooth and that she became a real beauty!
Let the good times roll !
GrtZ
Philippe
Re: Z1-A debut
Posted: Tue Jun 01, 2021 8:07 pm
Author: Wrigers
Very nice... as soon as Rivi barn re opens. We should all have a Zed meet?..
Re: Z1-A debut
Posted: Wed Jun 02, 2021 5:50 am
Author: baz
Wrigers wrote:Very nice... as soon as Rivi barn re opens. We should all have a Zed meet?..
sounds good to me
Re: Z1-A debut
Posted: Wed Jun 02, 2021 6:34 am
Author: DavidZ1R
Rivington is open guys.
Re: Z1-A debut
Posted: Wed Jun 02, 2021 2:19 pm
Author: Wrigers
This weekend is fine and dry, just depends when we can all make it......
Re: Z1-A debut
Posted: Wed Jun 02, 2021 3:05 pm
Author: DavidZ1R
I'm in for a get together
Re: Z1-A debut
Posted: Wed Jun 02, 2021 3:43 pm
Author: Wrigers
I'm good Dave, this weekend Saturday or Sunday whichever is best for those that fancy it...
Re: Z1-A debut
Posted: Wed Jun 02, 2021 4:28 pm
Author: DavidZ1R
Sundays are best for the top barn, you now have to park at the side car park, top round park for peds only.
Re: Z1-A debut
Posted: Sat Jun 05, 2021 7:55 pm
Author: Wrigers
Weather permitting, there's a few of us off up to Rivington tomorrow around midday, we're all on classics of all models, see you there if you fancy a trip out.......
Re: Z1-A debut
Posted: Sat Jun 05, 2021 8:19 pm
Author: DavidZ1R
I'm in Paul
Re: Z1-A debut
Posted: Tue Jun 08, 2021 7:10 am
Author: Wrigers
Good to catch up on Sunday Dave, turned out ok in the end!!!.....
Re: Z1-A debut
Posted: Tue Jun 08, 2021 5:20 pm
Author: DavidZ1R
Wrigers wrote:Good to catch up on Sunday Dave, turned out ok in the end!!!.....
Yes always good for a catch up, nice to see Keith up there as well.
Re: Z1-A debut
Posted: Tue Aug 31, 2021 11:34 am
Author: MrDavo
I went up to Lancaster and back on Saturday, around 150 miles round trip, to see my Mum. She didn't fancy a ride on pillion.
The bike went well, very smooth and no issues. By the time I got back it had done 500 miles since going back on the road after the top end checkover, so its now having its first service. One of the valve clearances has opened up somehow, the other 7 are all in spec. I will order a shim from Z Power today. Also a couple of the head bolts needed re tightening. Plugs are clean, also all four piston crowns have the same colour carbon on them, unlike the first attempt.